Derek,
Oops! The error was actually from just a simple WBFM Receiver block which has the audio sink. No soundcard involved in my setup.
I still don’t think I will be utilizing the GPU though because GNURadio isn’t showing up in the GPU processes.. Will I be at least utilizing the CPU? I will test the block diagrams I sent you on the server (I just have tested them on my
laptop initially) and I will get back to you.
Thank you,
LJ Eads
From: Derek Kozel [mailto:address@hidden
Sent: Wednesday, May 2, 2018 10:20 AM
To: Eads, LJ D. <address@hidden>
Cc: Müller, Marcus (CEL) <address@hidden>; address@hidden
Subject: Re: [Discuss-gnuradio] How do I interface my X310 with an NVIDIA K80 GPU in GNURadio
I don't see an audio sink in either of those flowgraphs, are those the ones causing the error? Is there supposed to be a soundcard involved at any point in your setup? To just capture, record, and replay the
file sink seems correct (to the limits of your hard drive write/read speeds).
Does sending and receiving to/from the USRP work if you use null sink and constant source to receive/produce data?
Derek
On Wed, May 2, 2018 at 3:08 PM, Eads, LJ D. <address@hidden> wrote:
Derek and Marcus,
Thank you for the quick response! This is my first entry to the mailing list.
So I am trying to capture a very fast frequency hopping signal.. the rate is proprietary but probably one of the fastest rates on the market right now. I am currently just implementing
a basic record/replay. I believe you are right that I am trying to route too much data to my speakers and that’s what I am trying to get out of.
I currently have had better success with the X310 right now using the GNURadio Live Environment on a USB and running Cat 5E from the X310 to my laptop.. now I’m trying to implement
what I had on my laptop on this server that I setup. I attached the server specs.. currently using ubuntu 16.04.
Marcus.. I am confused as well! Because I feel like I should be using my CPUs and I am not.
LJ Eads
From: Derek Kozel [mailto:address@hidden]
Sent: Wednesday, May 2, 2018 9:43 AM
To: Müller, Marcus (CEL) <address@hidden>
Cc: address@hidden; Eads, LJ D. <address@hidden>
Subject: Re: [Discuss-gnuradio] How do I interface my X310 with an NVIDIA K80 GPU in GNURadio
It would help to know what type of signal processing you are hoping to do and how you want to display or save the data. On generally available consumer hardware GNU Radio has been shown
to be able to handle 800+MS/s of samples being displayed in spectrum plots.
It sounds like you are trying to route too much data to your speakers. Are you able to share your flowgraph? There is a screenshot function in the menu or the grc file could be attached.
Regards,
Derek
On Wed, May 2, 2018 at 2:28 PM, Müller, Marcus (CEL) <address@hidden> wrote:
Hi LJ Eads,
I'm a bit confused: What has your sound card to do with GNU Radio, or
the USRP? And how is your sound card comparable to a GPU?
GNU Radio runs on CPUs.
Best regards,
Marcus
On Wed, 2018-05-02 at 13:23 +0000, Eads, LJ D. wrote:
> Hello,
> I just setup a USRP X310 that I plan on using with GNURadio over 10 gigabit.. I have everything working and functioning properly (drivers and all) but my only concern right now is that GNURadio is running off of the sound card on my server and not the GPU.
GNURadio isn’t able to handle practically anything because I am limited by the sound card capability.
> How would I be able to use the CPU (Sixteen-Core Intel Xeon Processor E5-2683 v4 2.10GHz 40MB Cache (120W)) or the GPU (NVIDIA Tesla K80 GPU Computing Accelerator - 24GB GDDR5 - Passive Cooler) for better functionality of the X310?
>
> My current error: “gr::log : INFO: audio_alsa_sink0 – [default]: unable to support sample rate 500000
> Card requested 192000 instead”
>
https://lists.gnu.org/archive/html/discuss-gnuradio/2014-06/msg00418.html - This sounds like my issue
>
> Thank you,
> LJ Eads
>
>
> L J Eads
> The MITRE Corporation
> (937) 874-7240 (Office)
> (954) 554-6801 (Mobile)
> address@hidden (FFRDC)
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
>
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
|