|
From: | U L |
Subject: | Re: [Discuss-gnuradio] Getting signal from a LEO Satellite? ( Doppler shift handling) |
Date: | Thu, 26 Oct 2017 20:14:40 -0700 |
Thank you.Should we adjust the Loop Bandwidth to track the signal correctly?2017-10-26 14:20 GMT+03:00 Jean-Michel FRIEDT <address@hiddenfr >:costas will do the job as long as your measurement bandwidth includes
twice the expected frequency offset, see http://jmfriedt.free.fr/efts_gps.pdf
slide 13.
JM--
I am planning to track a signal from a LEO Satellite which transmits
approx. 100 kbps BPSK.
I wonder which blocks should I use since the carrier offset ranges are:
around -50 kHz (beginning of the pass)
around +50 kHz (at the endof the pass)
Possible blocks are:
PLL Carrier Tracking
Costas Loop (using the frequency output port to get the carrier freq. error)
Any other suggestions- Examples?
Please don't offer manually shifting the frequency.(Using Gpredict)
JM Friedt, FEMTO-ST Time & Frequency/SENSeOR, 26 rue de l'Epitaphe, 25000 Besancon, France
------------------------------------------------------------ ----
This message was sent using IMP, the Internet Messaging Program.
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
[Prev in Thread] | Current Thread | [Next in Thread] |