Hi Marcus,
yeah we have updated the UHD on the latest version and the problem still persists. I have started to debug the UHD and we suspect some kind of inconsistency between the device pointers of the different devices. Perhaps a race condition is hidden somewhere.
I also attach two plots. The first one is the problematic with
two different USRPs and the second the expected signal
transmitting and receiving using the same USRP.
Thanks, George.
Two things:
Could you try updating to the most recent UHD version?
It would be helpful if you provided your .dat files in the form of plots or graphs, highlighting the areas you consider "distortion". This will help us help you.
On 2017-06-13 07:23, George Vardakis wrote:
Good evening,I attach three captures to show you the problem, one with the reference signal i transmit, one with the received samples when using the same device for TX and RX and one with the received samples of the one device, when the second one transmits. I also attach the flowgraph i used for this capture. The sampling rate i use is 1MHz. The specific captures are done with the USRPs over USB-2 ports, but i have also tried over USB-3 and observed the same behavior.Thank you for your time
On Tue, Jun 13, 2017 at 12:04 AM, Marcus D. Leech <address@hidden> wrote:
______________________________On 06/12/2017 03:53 PM, George Vardakis wrote:COuld you perhaps share a very-simple flow-graph that shows the issue? What sample-rate are you using? Is this over USB-2 or USB-3?Hello all,I have two USRP B210 devices which i use in my MIMO application. When i use the two of them concurrently in a flowgraph - or different flowgraphs - i notice that the signal received by the streams of one of the devices (the one whose serial number is last in lexicographical order) is distorted. Because i transmit a known training sequence, i know what to expect, and i observe that sometimes the real or imaginary part of the signal has flipped its sign (i see the signal mirrored compared to the known one), or other times it is completely distorted. When i use each device separately, everything works fine. The UHD driver i use is the v3.9.5 one.Any ideas about it?Thank you!
_______________________________________________ Discuss-gnuradio mailing list address@hidden https://lists.gnu.org/mailman/ listinfo/discuss-gnuradio _________________ Discuss-gnuradio mailing list address@hidden https://lists.gnu.org/mailman/ listinfo/discuss-gnuradio _______________________________________________ Discuss-gnuradio mailing list address@hidden https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
-- /* Code is the Law */
