How do I go back one rev on github?
Original Message
From: Cinaed Simson
Sent: Saturday, April 29, 2017 6:42 PM
To: address@hidden
Subject: Re: [Discuss-gnuradio] test and build errors on 3.7.12git-101-g098dc3e0
On 04/29/2017 05:52 PM, address@hidden wrote:
I have ZMQ. Here is the cmake finding it:
-- Configuring gr-wxgui support...
-- Dependency ENABLE_GNURADIO_RUNTIME = ON
-- Dependency ENABLE_GR_FFT = ON
-- Dependency ENABLE_GR_FILTER = ON
-- Dependency ENABLE_GR_ANALOG = ON
-- Dependency ENABLE_PYTHON = ON
-- Dependency NUMPY_FOUND = TRUE
-- Dependency WX_FOUND = TRUE
-- Enabling gr-wxgui support.
-- Override with -DENABLE_GR_WXGUI=ON/OFF
-- Checking for module 'libzmq'
-- Found libzmq, version 4.1.2
-- Found ZEROMQ: /usr/lib64/libzmq.so
----------------------------------------
I also have scipy, though I don't see it being looked for in the cmake.
I'm running a release version - 3.7.11 - you're on 3.7.12 which is on
the bleeding edge so your mileage may vary - it's work in progress
unless I missed the email of its release.
The test for polar uses python-scipy which requires scipy.
See
./gnuradio-3.7.11/gr-fec/python/fec/polar/channel_construction_awgn.py
which imports
from scipy.optimize import fsolve
from scipy.special import erfc
In general, you need to run the run the qa scripts in the directories
where the tests failed - assuming all the CMake configure errors or the
software not found messages have been cleared.
-- Cinaed
I missed this one, but I also have libcodec2.
-- Configuring gr-vocoder support...
-- Dependency Boost_FOUND = 1
-- Dependency ENABLE_GNURADIO_RUNTIME = ON
-- Dependency ENABLE_GR_FFT = ON
-- Dependency ENABLE_GR_BLOCKS = ON
-- Dependency ENABLE_GR_FILTER = ON
-- Dependency ENABLE_GR_ANALOG = ON
-- Enabling gr-vocoder support.
-- Override with -DENABLE_GR_VOCODER=ON/OFF
-- Found libgsm: /usr/include/gsm, /usr/lib64/libgsm.so
-- System libcodec2 not found.
-- Checking for module 'libusb-1.0'
-- Found libusb-1.0, version 1.0.20
-- Found libusb-1.0: /usr/include/libusb-1.0, /usr/lib64/libusb-1.0.so
On Sat, 29 Apr 2017 12:05:30 -0700
Ron Economos <address@hidden> wrote:
For the polar encoder/decoder and zeromq tests, you need the
following dependencies. I'm not sure about the other failures.
python-scipy
python-zmq
Ron
On 04/29/2017 11:31 AM, address@hidden wrote:
Opensuse 42.2
uname -a
Linux linux-0u81 4.4.57-18.3-default #1 SMP Thu Mar 30 06:39:47 UTC
2017 (39c8557) x86_64 x86_64 x86_64 GNU/Linux
---------------
Building for version: 3.7.12git-101-g098dc3e0 / 3.7.12git
Entire cmake output at:
https://pastebin.com/Gqa32538
----------
Errors in the doxygen build:
https://pastebin.com/2KVp6v9X
--------------------------------
95% tests passed, 11 tests failed out of 220
Total Test time (real) = 3850.12 sec
The following tests FAILED:
18 - qa_cpp_py_binding (Failed)
22 - qa_ctrlport_probes (Failed)
51 - qa_cpp_py_binding_set (Failed)
84 - qa_python_message_passing (Failed)
89 - qa_polar_encoder_systematic (Failed)
92 - qa_polar_encoder (Failed)
94 - qa_polar_decoder_sc (Failed)
95 - qa_polar_decoder_sc_list (Failed)
98 - qa_polar_decoder_sc_systematic (Failed)
218 - qa_zeromq_sub (Failed)
219 - qa_zeromq_pub (Failed)
Errors while running CTest
Makefile:72: recipe for target 'test' failed
make: *** [test] Error 8
For the complete make test:
https://pastebin.com/JwHqDGrc
------------------------
ctest -V -R ctrlport_probes
UpdateCTestConfiguration
from :/usr/local/src/gnuradio_latest/gnuradio/build/DartConfiguration.tcl
UpdateCTestConfiguration
from :/usr/local/src/gnuradio_latest/gnuradio/build/DartConfiguration.tcl
Test project /usr/local/src/gnuradio_latest/gnuradio/build
Constructing a list of tests
Done constructing a list of tests
Checking test dependency graph...
Checking test dependency graph end
test 22
Start 22: qa_ctrlport_probes
22: Test command: /usr/bin/sh
"/usr/local/src/gnuradio_latest/gnuradio/build/gr-blocks/python/blocks/qa_ctrlport_probes_test.sh"
22: Test timeout computed to be: 9.99988e+06
22: gr::log :INFO: controlport - Apache Thrift: -h linux-0u81 -p
42407 22: Could not connect to ControlPort endpoint at
linux-0u81:42407. 22:
22: Exception socket.error: (32, 'Broken pipe') in <bound method
ThriftRadioClient.__del__ of
<gnuradio.ctrlport.RPCConnectionThrift.ThriftRadioClient instance
at
0x7f046ca06200>> ignored
22: Could not connect to ControlPort endpoint at linux-0u81:42407.
22:
22: Exception socket.error: (32, 'Broken pipe') in <bound method
ThriftRadioClient.__del__ of
<gnuradio.ctrlport.RPCConnectionThrift.ThriftRadioClient instance
at
0x7f046ca117e8>> ignored
22: Could not connect to ControlPort endpoint at linux-0u81:42407.
22:
22: Exception socket.error: (32, 'Broken pipe') in <bound method
ThriftRadioClient.__del__ of
<gnuradio.ctrlport.RPCConnectionThrift.ThriftRadioClient instance
at
0x7f046ca11b48>> ignored
22: Could not connect to ControlPort endpoint at linux-0u81:42407.
22:
22: Exception socket.error: (32, 'Broken pipe') in <bound method
ThriftRadioClient.__del__ of
<gnuradio.ctrlport.RPCConnectionThrift.ThriftRadioClient instance
at
0x7f046ca11e60>> ignored
^C^C
------------------------------------
ctest -V -R cpp_py
UpdateCTestConfiguration
from :/usr/local/src/gnuradio_latest/gnuradio/build/DartConfiguration.tcl
UpdateCTestConfiguration
from :/usr/local/src/gnuradio_latest/gnuradio/build/DartConfiguration.tcl
Test project /usr/local/src/gnuradio_latest/gnuradio/build
Constructing a list of tests
Done constructing a list of tests
Checking test dependency graph...
Checking test dependency graph end
test 18
Start 18: qa_cpp_py_binding
18: Test command: /usr/bin/sh
"/usr/local/src/gnuradio_latest/gnuradio/build/gr-blocks/python/blocks/qa_cpp_py_binding_test.sh"
18: Test timeout computed to be: 9.99988e+06
18: gr::log :INFO: controlport - Apache Thrift: -h linux-0u81 -p
41848 18: Could not connect to ControlPort endpoint at
linux-0u81:41848. 18:
18: Exception socket.error: (32, 'Broken pipe') in <bound method
ThriftRadioClient.__del__ of
<gnuradio.ctrlport.RPCConnectionThrift.ThriftRadioClient instance
at 0x7f81c0071518>> ignored ^C^C
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio