[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Bug with scrambler in hierarchical block
|
From: |
Bastian Bloessl |
|
Subject: |
Re: [Discuss-gnuradio] Bug with scrambler in hierarchical block |
|
Date: |
Tue, 14 Feb 2017 19:15:48 +0100 |
|
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:45.0) Gecko/20100101 Thunderbird/45.7.0 |
Hi,
On 02/14/2017 03:46 PM, Daniel Estévez wrote:
>
> See the attached files. The hierarchical block is ccsds_descrambler.grc.
> The test flowgraph is test.grc. It contains both the "CCSDS descrambler"
> block and a set of blocks which is precisely what is inside the "CCSDS
> descrambler" block. By default, you see the output of the CCSDS
> descrambler. Note that the first time the first byte is 0xff but the
> remaining times it is 0x7f. However, if you disable one of the message
> debug blocks and enable the other one, you'll see that the first byte is
> always 0xff.
I tested the flow graph with current next and master branches and didn't
see the problem, i.e., the first byte of both message debug blocks was
always 0xff.
Are you sure you don't use any custom patches?
Best,
Bastian