discuss-gnuradio
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] Last step in GNURadio - SDRPlay install


From: Cinaed Simson
Subject: Re: [Discuss-gnuradio] Last step in GNURadio - SDRPlay install
Date: Fri, 27 Jan 2017 22:19:08 -0800
User-agent: Mozilla/5.0 (X11; Linux i686; rv:45.0) Gecko/20100101 Thunderbird/45.6.0

On 01/27/2017 04:33 AM, Arie Kleingeld PA3A wrote:
> You are correct Cinaed and I understand what you mean.

Actually, I don't think you understand.

We need you to post the gnuradio flowchart.

It's impossible to debug your problem without the flowchart.

-- Cinaed

> 
> Problem is that sdrplay does not deliver the data to the FFT. I enclosed
> the output from GRC to provide more info.
> Still looking for a solution.
> 
> 73 PA3A
> 
> 
> Op 27-1-2017 om 0:21 schreef Cinaed Simson:
> 
>> Your grc file - the file which was executed by gnuradio and generated
>> the selective outputs below.
>>
>> -- Cinaed
>>
>>> Kind regards,
>>> Arie PA3A
>>>
>>> ---------
>>> /Generating: '/home/aw/Bureaublad/top_block.py'//
>>> //
>>> //Executing: /usr/bin/python -u /home/aw/Bureaublad/top_block.py//
>>> //
>>> //Using Volk machine: sse4_1_64_orc//
>>> //gr-osmosdr v0.1.4-75-gae686c46 (0.1.5git) gnuradio 3.7.9//
>>> //built-in source types: file fcd rtl_tcp sdrplay rfspace redpitaya //
>>> //get_devices started//
>>> //Device count: 1//
>>> //sdrplay=0,label='SDRplay RSP'//
>>> //get_devices end//
>>> //get_num_channels: 1//
>>> //get_num_channels: 1//
>>> //set_sample_rate start//
>>> //rate = 1e+06//
>>> //diff = -1.048e+06//
>>> //set_sample_rate end//
>>> //get_num_channels: 1//
>>> //get_num_channels: 1//
>>> //get_num_channels: 1//
>>> //set_center_freq start//
>>> //freq = 9.34e+07//
>>> //diff = -1.066e+08//
>>> //set_center_freq end//
>>> //get_num_channels: 1//
>>> //get_num_channels: 1//
>>> //get_num_channels: 1//
>>> //get_num_channels: 1//
>>> //get_num_channels: 1//
>>> //get_num_channels: 1//
>>> //get_num_channels: 1//
>>> //set_gain started//
>>> //gain = 10//
>>> //set_gain end//
>>> //get_num_channels: 1//
>>> //get_num_channels: 1//
>>> //get_num_channels: 1//
>>> //get_num_channels: 1//
>>> //reinit_device started//
>>> //after mutex.lock//
>>> //mir_sdr_Init started//
>>> //reinit_device end/
>>>
>>> ----------------------------
>>>
> 
> 
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> 




reply via email to

[Prev in Thread] Current Thread [Next in Thread]