|
| From: | Usman Haider |
| Subject: | Re: [Discuss-gnuradio] PyBombs installation issue |
| Date: | Wed, 18 Jan 2017 13:58:39 +0500 |
$ cd ~/rfnoc $ source ./setup_env.sh
$ uhd_images_downloader
$ gnuradio-companionPossibly just a temporary failure then; github or your network might have had problems :)
Cheers,
Marcus
On 17.01.2017 08:01, Usman Haider wrote:
Hello Marcus,
I am surprised the following command ran successfully.
$ pybombs -vv recipes add gr-recipes git+https://github.com/gnuradio/gr-recipes.git
--
Usman
On Mon, Jan 16, 2017 at 5:10 PM, Marcus Müller <address@hidden> wrote:
______________________________Hm, interesting. Could you run your pybombs command with "-vv"?
Best regards,
Marcus
On 01/16/2017 12:55 PM, Usman Haider wrote:
UsmanPlease let me know if you need any further information. Thanks.Hello Nicolas,Thanks for your reply. I have sufficient disk space, more than 400 GB, so that is not an issue. I do not have any .gitconfig file in my home directory. I can download the recipes manually using the command you mentioned.
git clone https://github.com/gnuradio/gr-recipes.git gr-recipes
--
On Mon, Jan 16, 2017 at 3:21 PM, Nicolas Cuervo <address@hidden> wrote:
- NicolasCheers,Please let us know if you find out something with this hypothesis I mentioned.just as a test that your git is working as expected.git clone https://github.com/gnuradio/gr3. Can you clone anything else manually? you can try running:or just by editing .gitconfig which is normally located at your home directory.git config --global --edit2. Do you have specific cloning configuration in your gitconfig? you can check this by typing:1. Do you have enough disk space? the recipes do not require a lot of disk space, though, but not enough space would lead to this.Hello Usman,uhm, this is odd. So far I can see the command is correct. Although error 128 means that git did not exit cleanly, and I just run it and it ran fine. Just some guesses for now:
-recipes.git gr-recipes
On Mon, Jan 16, 2017 at 9:46 AM, Usman Haider <address@hidden> wrote:
______________________________I am following this guide to get started with RFNoC. I am using Ubuntu 14.04 and I ran following commands
$ sudo apt-get install git $ sudo apt-get install python-setuptools python-dev build-essential $ sudo easy_install pip $ sudo pip install git+https://github.com/gnuradio/pybombs.git When I run following command $ pybombs -v recipes add gr-recipes git+https://github.com/gnuradiI get output.o/gr-recipes.git ..... ..... ..... OMBS.PackageManager - DEBUG - Checking if package git is installed... PyBOMBS.Packager.apt - DEBUG - Package git has version 1.9.1 installed PyBOMBS.install_manager - DEBUG - Phase 2: Recursively installing source packages to prefix: PyBOMBS.Fetcher.git - DEBUG - Requirements met. PyBOMBS.Fetcher.git - DEBUG - Using url - https://github.com/gnuradio/gr-recipes.git PyBOMBS._process_thread() - DEBUG - Executing command `git clone https://github.com/gnuradio/gr-recipes.git gr-recipes' Cloning: [ PyBOMBS.recipes - ERROR - Could not fetch recipesCloning: [ PyBOMBS.recipes - ERROR - Could not fetch recipes: Process returnCloning: (100%) [=========================================================] PyBOMBS.monitor_process() - DEBUG - Thread signaled termination or returned PyBOMBS.monitor_process() - DEBUG - Return value: 128 PyBOMBS.recipes - ERROR - Could not fetch recipes: Process returned value: 128 What could be the issue? pybombs version is 2.3.1a. Thanks --Usman_________________ Discuss-gnuradio mailing list address@hidden https://lists.gnu.org/mailman/ listinfo/discuss-gnuradio _______________________________________________ Discuss-gnuradio mailing list address@hidden https://lists.gnu.org/mailman/ listinfo/discuss-gnuradio _________________ Discuss-gnuradio mailing list address@hidden https://lists.gnu.org/mailman/ listinfo/discuss-gnuradio
| [Prev in Thread] | Current Thread | [Next in Thread] |