[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] CommRadio CR-1a
From: |
Cinaed Simson |
Subject: |
Re: [Discuss-gnuradio] CommRadio CR-1a |
Date: |
Tue, 6 Sep 2016 19:56:21 -0700 |
User-agent: |
Mozilla/5.0 (X11; Linux i686 on x86_64; rv:45.0) Gecko/20100101 Thunderbird/45.2.0 |
On 09/06/2016 02:05 PM, Ed Criscuolo wrote:
> I've just ordered one of these SDR standalone radios,
It appears to be a radio - not a SDR.
> and it has the
> capability of outputting its I/Q samples on a USB port.
Evidently only under Windows using the vendors software.
3rd parties can write software based on their protocol.
>
> Has anyone tried to interface one of these to GnuRadio yet? Seems that
> it would be one solution for HF (aka shortwave) reception.
>
> http://www.commradio.com/cr-1-cr-1a-reference/
>
> @(^.^)@ Ed
> Sent from my iPhone
>
> On Sep 6, 2016, at 4:34 AM, Marcus Müller <address@hidden
> <mailto:address@hidden>> wrote:
>
>> Yes, you can :) Offering synchronization using external 10MHz and PPS
>> signals is the purpose of the Octoclock-G !
>>
>> However, the B210's LOs will have a random phase after every tuning,
>> so you must calibrate the relative phase offsets every time you tune
>>
>> Best regards,
>>
>> Marcus
>>
>>
>> On 06.09.2016 10:21, Samith Abeywickrama wrote:
>>> Hi all,
>>>
>>> I'm going to implement MUSIC(Multiple Signal Classification)
>>> algorithm to find Angle of Arrival of signal using two USRP B210s.
>>> Therefore I have 4 antennas. But I need to synchronise my two USRP
>>> B210s. May I know that can I use Octoclock-G with my USRP B210s
>>> without any problem? Thank you in advance.
>>>
>>> --
>>> Best Regards!
>>> Samith
>>
>> @(^.^)@ Ed
>> Sent from my iPhone
>>
>> Discuss-gnuradio mailing list
>> address@hidden <mailto:address@hidden>
>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>