discuss-gnuradio
[Top][All Lists]
Advanced
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] B200/mini GPIO

From: Marcus D. Leech
Subject: Re: [Discuss-gnuradio] B200/mini GPIO
Date: Wed, 04 May 2016 11:25:20 -0400
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0
On 05/04/2016 11:18 AM, Santos Campos wrote:
Hello! I am curious if it is possible to use a pin or something on either the B200 or B200 mini to send a control signal.

We were hoping to be able to switch between 2 antennas if the board received some signal. It looks like there could be some available pins, but we were unsure if they would be able to fulfill our purpose. If not, any ideas around this issue would be welcome!

Any help would be much appreciated!


_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
The API for the B2xx GPIO is the same as for X3xx.

There's example code:

.../uhd/examples/gpio.cpp


reply via email to
[Prev in Thread] Current Thread [Next in Thread]