|
From: | abhinav narain |
Subject: | Re: [Discuss-gnuradio] Question regarding correlating output and IQ samples in a reciever |
Date: | Tue, 26 Jan 2016 18:17:04 -0800 |
Hi Abhinav,
point of timing recovery like you do it is that there's no IQ samples that *exactly and reliably* correspond to the symbol timing; that's why you need timing recovery. The question here is: what do you actually need? The IQ samples before timing recovery aren't useful to the decoder.
Just to assure you: AGC2 doesn't modify the number of samples, it just multiplies with a factor that changes so that average power stays the same.
Best regards,
Marcus
On 01/25/2016 06:26 PM, abhinav narain wrote:
Hi All,My problem is that above calculation sort of works, and isn't it exact.
I have the following preable of 32 bits [1,0,1,0,1,1,0,0,1,1,0,1,1,1,0,1,1,0,1,0,0,1,1,0,0,1,1,1,0,1,0,1].This can be seen in badpreamble.png, where for some reason I have trailing 0s or noise and thestart of preamble is missing.
If I shift the position to 8 bits lag in the bit file and then plot(8shiftedpreamble.png), the correspondingIQ samples using above logic, it is almost right (alhough sitll not right.
Any suggestions how to get the exact IQ samples ?Thanks,Abhinav
On Sun, Jan 24, 2016 at 11:03 AM, abhinav narain <address@hidden> wrote:
Hi all,This might be too simple, but I wanted to confirm as I am not sure how theblocks manipulate the IQ samples and how AGC works, does it add moresamples for compensating the noise average or not.
I have a flowgraph(image attached) which dumps the IQ samples and the bits after using Polyphase Clock Sync. I want to find exact IQ samples corresponding toa specific preamble in the bitsequence I have obtained in the outputfile.Let say the starting position of sample is= P, the sample rate=S ksps, samples \per symbol=Y.
Is it correct to assume that the index of iq samples corresponding topreamble in the IQ file will be at index P*Y ?If preamble size is 32 bits then there will be 32*Y of them ?
Thanks,Abhinav
_______________________________________________ Discuss-gnuradio mailing list address@hidden https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
[Prev in Thread] | Current Thread | [Next in Thread] |