[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Problem with USRP B200
From: |
Henning Bredenberg |
Subject: |
Re: [Discuss-gnuradio] Problem with USRP B200 |
Date: |
Wed, 20 Jan 2016 14:02:33 +0100 |
User-agent: |
Horde Application Framework 5 |
Hello and thank you for answering, James.
Do you have multiple USRP's hooked up? If so, try only having one plugged
in for this initial test.
I just have a single USRP B200 connected.
You can provide a device hint in the arguments of the UHD source block. Try:
"type=b200"
As another test, make sure you can use the built in utilities of UHD to
detect your USRP.
uhd_usrp_probe
uhd_find_devices
You can also give a device hint like:
uhd_usrp_probe --args="type=b200"
the commands uhd_usrp_probe and uhd_find_devices return the needed
information for the one USRP:
Device Address:
type: b200
name:
serial: F5EA56
product: B200
The USRP source block now needs the device addr. Following the
documentation, "serial=F5EA56" is used as connection string.
RuntimeError: LookupError: KeyError: No devices found for ----->
Device Address:
serial: F5EA56
when i use uhd_find_device again, it still comes up with the same
data shown above. So it should be the right adress, right?