|Subject:||Re: [Discuss-gnuradio] Firmware is not compatibile|
|Date:||Thu, 15 Oct 2015 00:17:25 +0200|
Wow Martin you are the best : DMy Board was all the time connected with computer. I didnt realized that it can be a problem.Thank You, now its working : )2015-10-14 23:35 GMT+02:00 Marcus Müller <address@hidden>:Hello Przemek,
after downloading, you'll have load the firmware onto the device; that usually happens automatically after a power cycle. Did you remove the USRP from power before trying to use it again? I'm asking because I don't see the FPGA loading sequence in your output.
Regarding the version mismatch: that should be ok, UHD 3.10. uses the 3.9 image compatibility.
On 14.10.2015 22:28, Przemek Lewandowski wrote:
My situation is:I had previously version of GnuRadio from June. Everything worked fine. Today I need to update my software due to patch for multiply_matrix_cc, and I had small problem with Pybomb due to Python Miko that wasnt exist. Ok I installed it. But befor that I searched solution and uninstalled nearly everything. And after that I had installed newest version of GNURadio from repository and newest version of UHD. Now everything is nearly working, buuuut when I want to send my old files to B210 I have this error:
Executing: '/usr/bin/python2 -u /home/przelew/Moje/top_block.py'
linux; GNU C++ version 4.8.4; Boost_105400; UHD_003.010.git-38-gc77ffb3e
Traceback (most recent call last):File "/home/przelew/Moje/top_block.py", line 260, in <module>main()File "/home/przelew/Moje/top_block.py", line 248, in maintb = top_block_cls()File "/home/przelew/Moje/top_block.py", line 75, in __init__channels=range(1),File "/home/przelew/target/lib/python2.7/dist-packages/gnuradio/uhd/__init__.py", line 122, in constructor_interceptorreturn old_constructor(*args)File "/home/przelew/target/lib/python2.7/dist-packages/gnuradio/uhd/uhd_swig.py", line 2034, in makereturn _uhd_swig.usrp_sink_make(*args)RuntimeError: RuntimeError: Expected firmware compatibility number 8.0, but got 7.0:The firmware build is not compatible with the host code build.Please run:
And yes, I run python script 3 times, and it replaced images properly.... Information should be somewhere else about firmware. OR I have UHD_003.010 and python scipt downloaded wrong version :) here is the output from python script:
address@hidden:~/target$ python /home/przelew/target/lib/uhd/utils/uhd_images_downloader.pyImages destination: /home/przelew/target/share/uhd/imagesDownloading images from: http://files.ettus.com/binaries/images/uhd-images_003.009.001-release.zipDownloading images to: /tmp/tmpq04WZA/uhd-images_003.009.001-release.zip24703 kB / 24703 kB (100%)
Images successfully installed to: /home/przelew/target/share/uhd/images
Thank You for any advice :)Przemek Lewandowski
_______________________________________________ Discuss-gnuradio mailing list address@hidden https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
Discuss-gnuradio mailing list
|[Prev in Thread]||Current Thread||[Next in Thread]|