discuss-gnuradio
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] 802.15.4 packet receive using transceiver_OQPSK.g


From: Bastian Bloessl
Subject: Re: [Discuss-gnuradio] 802.15.4 packet receive using transceiver_OQPSK.grc
Date: Mon, 12 Oct 2015 10:03:01 -0700

Hi,

you connect the output of the PHY to the USRP source and sink blocks and start 
it. Then it will actually transmit something.
If you do this on two PCs they should receive each others frames.

Best,
Bastian



> On 12 Oct 2015, at 06:48, Jaeho <address@hidden> wrote:
> 
> I think my question need to be more detail
> 
> I have two USRP X300 and two laptop 
> 
> Each USRP connected with laptop through Ethernet cable
> 
> One USRP (A) is a transmitter and the other USRP (B) is a receiver
> 
> (A) sends a packet (broadcasting), (B) want to receive these packet from (A)
> 
> I already saw loopback experiment and transceiver examples
> 
> but it seems like run in only one USRP device
> 
> I want to know how can I run two USRP devices 
> 
> and how can I program (B) receive packets from (A) -> between different
> other devices
> 
> 
> 
> 
> 
> 
> 
> --
> View this message in context: 
> http://gnuradio.4.n7.nabble.com/802-15-4-packet-receive-using-transceiver-OQPSK-grc-tp56443p56446.html
> Sent from the GnuRadio mailing list archive at Nabble.com.
> 
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> 

--
Dipl.-Inform. Bastian Bloessl
Distributed Embedded Systems Group
University of Paderborn, Germany
http://www.ccs-labs.org/~bloessl/




reply via email to

[Prev in Thread] Current Thread [Next in Thread]