discuss-gnuradio
[
Top
][
All Lists
]
Advanced
[
Date Prev
][
Date Next
][
Thread Prev
][
Thread Next
][
Date Index
][
Thread Index
]
[Discuss-gnuradio] mirrored spectrum around tuning freq
From
:
Luca Pascale
Subject
:
[Discuss-gnuradio] mirrored spectrum around tuning freq
Date
:
Mon, 10 Aug 2015 18:24:25 +0200
Hi all,
why when I use:
uhd::tune_request_t tr(tuningFreq);
USRP_DEVICE->set_rx_freq(tr);
I get a spectrum that is "mirrored" around the tuninFreq ?
See:
http://picpaste.com/sp-zJquS0qK.png
with tuningFreq = 149.8 MHz, input signal at F = 150 MHz (from signal generator)
If I use a LO offset different from zero the mirror effect disappear.
Why ?
Thanks,
Luca
reply via email to
[Prev in Thread]
Current Thread
[
Next in Thread
]
[Discuss-gnuradio] mirrored spectrum around tuning freq
,
Luca Pascale
<=
Re: [Discuss-gnuradio] mirrored spectrum around tuning freq
,
Martin Braun
,
2015/08/10
Re: [Discuss-gnuradio] mirrored spectrum around tuning freq
,
Marcus Müller
,
2015/08/10
Re: [Discuss-gnuradio] mirrored spectrum around tuning freq
,
Luca Pascale
,
2015/08/11
Re: [Discuss-gnuradio] mirrored spectrum around tuning freq
,
Marcus Müller
,
2015/08/11
Re: [Discuss-gnuradio] mirrored spectrum around tuning freq
,
Martin Braun
,
2015/08/11
Re: [Discuss-gnuradio] mirrored spectrum around tuning freq
,
Luca Pascale
,
2015/08/12
Prev by Date:
Re: [Discuss-gnuradio] Processing expectations
Next by Date:
Re: [Discuss-gnuradio] mirrored spectrum around tuning freq
Previous by thread:
[Discuss-gnuradio] pybombs install problem
Next by thread:
Re: [Discuss-gnuradio] mirrored spectrum around tuning freq
Index(es):
Date
Thread