discuss-gnuradio
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] Transmission issue in USRP N210


From: Marcus Müller
Subject: Re: [Discuss-gnuradio] Transmission issue in USRP N210
Date: Tue, 07 Apr 2015 15:10:20 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.6.0

The other Marcus here, I was the one that said something about the LEDs:

If your N210's transmit LED is not on, then openBTS simply did not instruct the USRP to send samples.
Thus, you will have to fix the problem on openBTS side. I'm pretty sure we went through all the diagnostics that made sense, and your USRP and UHD are working fine.

Greetings,
Marcus

On 04/07/2015 02:56 PM, Zamrath Nizam wrote:
Hi Marcus,

Can you ping the N210?
Yes. "ping 192.168.10.2" works fine.

If you use: uhd_usrp_probe --args addr=192.168.10.2, What happens?
"uhd_usrp_probe" also works fine. Couldn't check with --args. I am away
from the board now for few hours. Until then...

Is your ethernet interface configured for 192.168.10.1 ?
Yes. Configured statically in "/etc/network/interfaces" file.

Thanks,
Zamrath Nizam

On Tue, Apr 7, 2015 at 6:13 PM, Marcus D. Leech <address@hidden> wrote:

 On 04/07/2015 08:14 AM, Zamrath Nizam wrote:

 Hi all,

 I have recently installed openbts-2.8 on a banana-pi (Processor: armv7)
board to work with USRP N210. Had all the pre-requisite installations and
procedures been done, I noticed that, the transmitter is not working.

 Though this issue seems to be related with openbts but since they are
not responding, I would like to have some suggestions from you to resolve
this issue.

 In a previous thread 'Marcus' has stated that LED A is not working because
openbts is not talking to USRP. i.e. USRP is not configured to receive
samples.

 Is he pointing to a receiving issue (probably I was looking for a
transmission issue) or am I the one who is confused?

 Can anyone please shed some light on this.

 Thank you.

 Best,
Zamrath Nizam


_______________________________________________
Discuss-gnuradio mailing address@hidden://lists.gnu.org/mailman/listinfo/discuss-gnuradio

 Can you ping the N210?

If you use:

uhd_usrp_probe --args addr=192.168.10.2

What happens?

Is your ethernet interface configured for 192.168.10.1 ?



_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio



      

_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio


reply via email to

[Prev in Thread] Current Thread [Next in Thread]