Re: [Discuss-gnuradio] GNU Radio on Zedboard

[Tom Rondeau]

On Fri, Mar 13, 2015 at 1:17 PM, Alireza Khodamoradi <address@hidden> wrote:

Hello everyone,

I'm going through the instructions from here:

http://gnuradio.org/redmine/projects/gnuradio/wiki/Zynq

to get a working image with gnu radio for my zedboard. 

Unfortunately I can't get the board to boot with this image. I was wondering if someone can help me.

what I tried so far ( all failed - can't boot from the SDCard):

- default settings in the instructions

- renaming u-boot.bin to boot.bin

- renaming u-boot.bin to BOOT.BIN

- renaming uImage--zedboard-zynq7.dtb to devicetree.dtb

- I tried command line as well as gparted gui.

what I checked:

- download a linux from XillyBus and boot the board with SDCard -> works

v/r

Alireza

Can you provide details about how it's not booting? Are you monitoring the boot sequence over the tty connection (/dev/ttyACM0, usually). I've noticed bugs on my system where the u-boot sequence doesn't kick off properly, so I have to go in over the serial connection to actually call 'boot' to get it to run. (I'm sure this problem is something that I've done to myself.)

Tom