From: discuss-gnuradio-bounces+address@hidden [mailto:discuss-gnuradio-bounces+address@hidden
On Behalf Of Tom Rondeau
Sent: Tuesday, August 26, 2014 10:10 AM
To: Stephen Harrison
Cc: address@hidden
Subject: Re: [Discuss-gnuradio] GNU Radio support on MicroZed
On Sat, Aug 23, 2014 at 11:42 PM, Stephen Harrison <address@hidden> wrote:
Hi Sean,
Is the Linaro distribution possible on MicroZed? I spent a long time trying to get OpenEmbedded to happen with no success. The Linaro distribution was a snap and I got GNURadio running no problem on the ZedBoard.
For reference on getting OE working, see our Embedded page:
Though I can't speak directly to the MicroZed.
Thanks, all, for the pointers. I’ll see if I can get MicroZed boot files to launch into the GNU Radio rootfs image.
Thanks,
Sean
On Sat, Aug 23, 2014 at 6:55 PM, West, Nathan <address@hidden> wrote:
On Fri, Aug 22, 2014 at 7:10 PM, Nowlan, Sean
<address@hidden> wrote:
> I'm not the world's foremost expert in OpenEmbedded (read: person with
> nearly no knowledge of how to use it). I'd like to get GNU Radio working on
> a MicroZed. Unfortunately that board is not among the boards supported as
> mentioned here:
http://gnuradio.org/redmine/projects/gnuradio/wiki/Zynq
> Also, I don't necessarily need John Pendlum's changes to add userspace
> support for interfacing with the FPGA. I just want to get the ARM running
> GNU Radio.
>
>
> The meta-xilinx-community repo claims to support a BSP and build for
> MicroZed:
>
http://git.yoctoproject.org/cgit/cgit.cgi/meta-xilinx-community/about/ How
> do I go about merging these two things together? I've taken my best guess as
> to how to setup a configuration with Poky:
>
>
> Build Configuration:
> BB_VERSION = "1.23.1"
> BUILD_SYS = "x86_64-linux"
> NATIVELSBSTRING = "Ubuntu-13.10"
> TARGET_SYS = "arm-poky-linux-gnueabi"
> MACHINE = "microzed-zynq7"
> DISTRO = "poky"
> DISTRO_VERSION = "1.6+snapshot-20140822"
> TUNE_FEATURES = " arm armv7a vfp neon zynq"
> TARGET_FPU = "vfp-neon"
> meta
> meta-yocto
> meta-yocto-bsp = "master:34436672f3ef4915e7526770a0fa8dcff328f93d"
> meta-xilinx = "master:83bf54daeaca21879290bf444876f9949b117454"
> meta-xilinx-community = "master:a093287b81d446435d44cf238a9240782a80e1b7"
> meta-oe
> meta-networking
> meta-filesystems = "master:8f637f9bbcdda1dc7a1998d243708c727aa6016f"
> meta-sdr = "master:21e2722a5e6671fd98268241f216e087f279566d"
>
> Am I on the right track here? It's still fetching/building/etc. I'm not too
> confident it will actually work, since I don't really know what I'm doing.
>
> Thanks,
> Sean
>
Hi Sean,
The embedded page might be more useful:
http://gnuradio.org/redmine/projects/gnuradio/wiki/embedded Especially
check out the link to SDKs. There's a rootfs and modules built for a
zedboard, all you'll need are device specific boot files. Just create
the right partitions on your card and the provided rootfs and modules
should be sufficient. (extract the rootfs to the / mounted partition
on the SD card). Hopefully that can get you booting
Nathan
|