[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Install UCLA-gr-802.15.4 into E100 has error
From: |
Bastian Bloessl |
Subject: |
Re: [Discuss-gnuradio] Install UCLA-gr-802.15.4 into E100 has error |
Date: |
Thu, 7 Aug 2014 10:16:25 +0200 |
Hi,
I don’t have a E100 so I don’t know if it is fast enough, but shouldn’t it be
easy to just try and find out?
Best,
Bastian
On 06 Aug 2014, at 17:45, Zongyi LIU <address@hidden> wrote:
>
>
> ---------- Forwarded message ----------
> From: Zongyi LIU <address@hidden>
> Date: 2014-08-06 17:30 GMT+02:00
> Subject: Re: [Discuss-gnuradio] Install UCLA-gr-802.15.4 into E100 has error
> To: Bastian Bloessl <address@hidden>
>
>
> Hi Bastian,
>
> I have read your paper "A GNURadio-based IEEE 802.15.4 Testbed". It's really
> an excellent job.
> Your testbed implement from PHY layer up to network layer and run Contiki
> system. But, you implement them on N210 with a high performance.
>
> So, I don't know whether it's possible to implement your code on E100? As you
> know, E100 use an embedded processor ARM Cortex-A8 with limited computational
> and process ability, it runs special Angstrom linux system.
> I got some information from this paper "IEEE 802.15.4 Implementation on an
> Embedded Device", it mentions that they can't used UCLA-802.15.4 code to
> receive packet. The embedded processor is not fast enough to demodulate data.
> Finally, he redesign FPGA to pre-process some data before sending them to
> processor and receive package barely..
> So, Hope for your suggestion and thank you again!
>
> Best
> Zongyi
>
>
> 2014-08-06 9:59 GMT+02:00 Bastian Bloessl <address@hidden>:
>
> You could give this a try
>
> https://github.com/bastibl/gr-ieee802-15-4
>
> Best,
> Bastian
>
>
> On 05 Aug 2014, at 18:07, Tom Rondeau <address@hidden> wrote:
>
> > On Tue, Aug 5, 2014 at 11:51 AM, Zongyi LIU <address@hidden> wrote:
> > Hello everyone:
> >
> > Recently, I want to install UCLA-gr-ieee802.15.4 module into my USRP E100.
> >
> > When I was configuring it, UCLA-gr-ieee802.15.4 had some error. I modify
> > the PATH as follow:
> > //"C_INCLUDE_PATH=/usr/include/python2.6
> > //export C_INCLUDE_PATH"
> > Beside, I modify the Makefile.common as follow to fix it:
> > //"# includes
> > //grincludedir = $(includedir)/gnuradio -I/usr/include/gnuradio
> > //# swig includes
> > //swigincludedir = $(grincludedir)/swig -I/usr/include/gnuradio/swig"
> >
> > But, after "./configure". there is a fatal error in
> > "make"----:"ucla.cc:149:20: fatal error: Python.h: No such file or
> > directory"
> > //
> > address@hidden:~/UCLA-gr-ieee802-15-4/gr-ieee802-15-4# make
> > make all-recursive
> > make[1]: Entering directory
> > `/home/root/UCLA-gr-ieee802-15-4/gr-ieee802-15-4'
> > Making all in config
> > make[2]: Entering directory
> > `/home/root/UCLA-gr-ieee802-15-4/gr-ieee802-15-4/config'
> > make[2]: Nothing to be done for `all'.
> > make[2]: Leaving directory
> > `/home/root/UCLA-gr-ieee802-15-4/gr-ieee802-15-4/config'
> > Making all in src
> > make[2]: Entering directory
> > `/home/root/UCLA-gr-ieee802-15-4/gr-ieee802-15-4/src'
> > Making all in lib
> > make[3]: Entering directory
> > `/home/root/UCLA-gr-ieee802-15-4/gr-ieee802-15-4/src/lib'
> > make all-am
> > make[4]: Entering directory
> > `/home/root/UCLA-gr-ieee802-15-4/gr-ieee802-15-4/src/lib'
> > /bin/bash ../../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I.
> > -I../.. -I/usr/include/gnuradio -I/usr/include/python2.6 -g -O2 -Wall
> > -Woverloaded-virtual -pthread -MT ucla.lo -MD -MP -MF .deps/ucla.Tpo -c -o
> > ucla.lo ucla.cc
> > libtool: compile: g++ -DHAVE_CONFIG_H -I. -I../.. -I/usr/include/gnuradio
> > "-I/usr/include/python2.6" -g -O2 -Wall -Woverloaded-virtual -pthread -MT
> > ucla.lo -MD -MP -MF .deps/ucla.Tpo -c ucla.cc -fPIC -DPIC -o .libs/ucla.o
> > ucla.cc:149:20: fatal error: Python.h: No such file or directory
> > compilation terminated.
> > make[4]: *** [ucla.lo] Error 1
> > make[4]: Leaving directory
> > `/home/root/UCLA-gr-ieee802-15-4/gr-ieee802-15-4/src/lib'
> > make[3]: *** [all] Error 2
> > make[3]: Leaving directory
> > `/home/root/UCLA-gr-ieee802-15-4/gr-ieee802-15-4/src/lib'
> > make[2]: *** [all-recursive] Error 1
> > make[2]: Leaving directory
> > `/home/root/UCLA-gr-ieee802-15-4/gr-ieee802-15-4/src'
> > make[1]: *** [all-recursive] Error 1
> > make[1]: Leaving directory `/home/root/UCLA-gr-ieee802-15-4/gr-ieee802-15-4'
> > make: *** [all] Error 2
> > //
> > I searched on google, the solution is install python-dev, but E100 has
> > python2.6 in facroty default.
> > So, it really confuse me a lot.
> > Thank you in advance!
> >
> > --
> > Zongyi LIU
> > Doctorant
> > Institut de Recherche en Informatique de Toulouse (IRIT)
> > Université Paul Sabatier, 118 Route de Narbonne, F-31062 TOULOUSE CEDEX 9
> > Email : address@hidden
> >
> > Just a word of caution: this is a very old project and not likely to work
> > with the latest GNU Radio code.
> >
> > You're problem is indeed that you don't have the development package for
> > Python installed. You have the normal, runtime package, but this doesn't
> > include the development header files.
> >
> > Tom
> >
> > _______________________________________________
> > Discuss-gnuradio mailing list
> > address@hidden
> > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
> --
> Dipl.-Inform. Bastian Bloessl
> Distributed Embedded Systems Group
> University of Paderborn, Germany
> http://www.ccs-labs.org/~bloessl/
>
>
>
>
> --
> Zongyi LIU
> Doctorant
> Institut de Recherche en Informatique de Toulouse (IRIT)
> Université Paul Sabatier, 118 Route de Narbonne, F-31062 TOULOUSE CEDEX 9
> Email : address@hidden
>
>
>
> --
> Zongyi LIU
> Doctorant
> Institut de Recherche en Informatique de Toulouse (IRIT)
> Université Paul Sabatier, 118 Route de Narbonne, F-31062 TOULOUSE CEDEX 9
> Email : address@hidden
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
--
Dipl.-Inform. Bastian Bloessl
Distributed Embedded Systems Group
University of Paderborn, Germany
http://www.ccs-labs.org/~bloessl/
Message not available