Re: [Discuss-gnuradio] Live DVD & X310

[Marcus D. Leech]

On 06/29/2014 08:51 AM, David Miller wrote:
> Hi,
>
> So I boot off of the Live DVD (3.7.4), and try GRC with an X310 and 
> get an error about the firmware version being 3, when 4 was expected.
>
> I then use usrp_x3xx_fpga_burner to update the firmware, which after a 
> few minutes of updating, I still get the same error with GRC?
>
> What am I doing wrong, is there a different firmware update required, 
> or is the DVD version wrong, please?
>
> Thanks,
> David
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
Did you power-cycle the device after updating the firmware?  The 
contents of flash are loaded into the FPGA on a reset, which happens
  at power-cycle, just like N2xx as far as I know.



--
Marcus Leech
Principal Investigator
Shirleys Bay Radio Astronomy Consortium
http://www.sbrac.org