discuss-gnuradio
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] Build on ubuntu 14.04


From: Robert McGwier
Subject: Re: [Discuss-gnuradio] Build on ubuntu 14.04
Date: Sun, 25 May 2014 07:48:38 -0400

And what is the size of the VM disk limited to and how much RAM have you allowed it?  The step you are showing as exiting in (SWIG) requires lots of resources in building gnuradio.  I hate SWIG, but have no idea what in the world we would do without it.


On Sun, May 25, 2014 at 6:16 AM, Marcus Müller <address@hidden> wrote:
Hi Michael,

build-grc.sh is not known to me; I think you're referring to
build-gnuradio? (grc is short for GNU Radio Companion, the graphical
Flowgraph Designer included in GNU Radio).

There have been problems with builds on Ubuntu 14.04.

However, your output indicates no error; so I'm not quite sure how to
help you. Maybe put the complete log somewhere on pastebin or
gist.github.com?
By the way, pybombs is the recommended way to go for modern systems.

If you really just want a running Linux VM with GNU Radio installed, try
the LiveDVD images:
http://gnuradio.org/redmine/projects/gnuradio/wiki/GNURadioLiveDVD

Greetings,
Marcus


On 25.05.2014 11:29, Michael Hartje wrote:
> Dear list,
>
> I try to compile the new GR 3.7.4-git.
>
> But it breaks with pybombs as well as with the script build-grc.sh
> The job is done inside of a virtualbox-environment. host: win8.1, guest
> ubuntu 14.04 + updates
>
> Mem 1600 MB
>
> cut of the script build-grc.sh  log
> -----------------8<--------------------------------
> -- CPU missing cvtpi32_ps, Overruled arch avx
> -- Check size of void*[8]
> -- Check size of void*[8] - done
> -- CPU width is 64 bits, Overruled arch 32
> -- Available architectures:
> generic;64;3dnow;abm;popcount;mmx;sse;sse2;orc;norc;sse3;ssse3;sse4_a;sse4_1;sse4_2
> -- Available machines:
> generic_orc;sse2_64_mmx_orc;sse3_64_orc;ssse3_64_orc;sse4_a_64_orc;sse4_1_64_orc;sse4_2_64_orc
> -- BUILTTYPERELWITHDEBINFO
> -- Base cflags = -O2 -g -DNDEBUG
> -- BUILD INFO ::: generic_orc ::: GNU ::: -O2 -g -DNDEBUG
> -- BUILD INFO ::: sse2_64_mmx_orc ::: GNU ::: -O2 -g -DNDEBUG  -m64
> -mmmx -msse -msse2
> -- BUILD INFO ::: sse3_64_orc ::: GNU ::: -O2 -g -DNDEBUG  -m64 -mmmx
> -msse -msse2 -msse3
> -- BUILD INFO ::: ssse3_64_orc ::: GNU ::: -O2 -g -DNDEBUG  -m64 -mmmx
> -msse -msse2 -msse3 -mssse3
> -- BUILD INFO ::: sse4_a_64_orc ::: GNU ::: -O2 -g -DNDEBUG  -m64 -mmmx
> -msse -msse2 -msse3 -msse4a -mpopcnt
> -- BUILD INFO ::: sse4_1_64_orc ::: GNU ::: -O2 -g -DNDEBUG  -m64 -mmmx
> -msse -msse2 -msse3 -mssse3 -msse4.1
> -- BUILD INFO ::: sse4_2_64_orc ::: GNU ::: -O2 -g -DNDEBUG  -m64 -mmmx
> -msse -msse2 -msse3 -mssse3 -msse4.1 -msse4.2 -mpopcnt
> -- Compiler Version: cc (Ubuntu 4.8.2-19ubuntu1) 4.8.2
> Copyright (C) 2013 Free Software Foundation, Inc.
> This is free software; see the source for copying conditions.  There is NO
> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
> -- Loading build date Thu, 22 May 2014 18:56:46 into constants...
> -- Loading version 0.1 into constants...
> -- Using install prefix: /usr/local
> -- ENABLE_GR_LOG set to ON.
> -- HAVE_LOG4CPP set to False.
> -- LOG4CPP_LIBRARIES set to .
> -----------------8<--------------------------------
> and some lines down during config of gnuradio
> -----------------8<--------------------------------
> -- Boost version: 1.54.0
> -- Found the following Boost libraries:
> --   date_time
> --   program_options
> --   filesystem
> --   system
> --   thread
> -- Enabling use of known bad versions of Boost.


_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio



--
Bob McGwier
Co-Owner and Technical Director, Federated Wireless, LLC
Professor Virginia Tech
Senior Member IEEE, Facebook: N4HYBob, ARS: N4HY
Faculty Advisor Virginia Tech Amateur Radio Assn. (K4KDJ)

reply via email to

[Prev in Thread] Current Thread [Next in Thread]