Re: [Discuss-gnuradio] funcube pro +

[Volker Schroer]

The funcube pro+ works flawless on my usb 2.0 port. It seems that the 
bandwidth problem arises from the usb controller hardware.

I use an ASROCK motherboard with SB7x0/SB8x0/SB9x0 controller in use 
with the ohci /ehci kernel drivers. This controller works very well for me.

The Inc. EJ168 USB 3.0 Host Controller instead does not work. It claims 
to have not enough bandwith but for both Funcube devices the ( pro and 
the pro+).

-- Volker



Am 12.02.2014 11:09, schrieb Alexandru Csete:
> On Wed, Feb 12, 2014 at 10:51 AM, Nemanja Savic <address@hidden> wrote:
> > Hi all guys,
> >
> > I am about to buy funcube dongle pro +, and wanted to ask if somebody of u
> > use it without any problems?
>
> Very few people use it on linux without problems. If you have a USB 1
> port it will probably work, otherwise you will likely get the
> "insufficient bandwidth" bug.
>
> https://github.com/csete/gqrx/issues/91
>
> There are however no problems with the original Funcube Dongle Pro
> (the one without shortwaves and only 96 kHz bandwidth).
>
> Alex
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio