Hi Everyone,
I recently found a couple USRP2's that have not been used for some time in
my lab, and decided to use them for some testing. One of the USRP2's worked
perfectly when I connected it up to the host computer, but the other one is
giving me issues. The uhd_find_devices is not able to detect this device.
I tried debugging this issue by first swapping the SD card from the working
USRP2 to the faulty one, with no success. I also tried reconfiguring the IP
address with the command:
sudo ./usrp2_recovery.py --ifc=eth0 --new-ip=192.168.10.4
Both uhd_find_devices and uhd_usrp_probe --args "addr=192.168.10.4" still
did not work. The LEDs on both USRP2's light up the same exact way. I have
now run out of ideas of what to do. Does anybody else possibly have a
solution to this problem?
Thank you very much in advance,
Rob