|
From: | Paul B. Huter |
Subject: | Re: [Discuss-gnuradio] OSParam Error |
Date: | Sun, 17 Nov 2013 17:49:03 -0600 |
As always, thank you, Marcus.
I am thinking about getting rid of the graph (and throttle, now), and making another setup to run the output file from the original (through a throttle?) to the graph to look at smaller pieces. I want to be able to look at (say) 5MHz-10MHz, so my plan is to set the FFT to be 5MHz centered on 7.5MHz. However, I am not sure if that is correct. But - first step is to get my data.
Thanks, again, Marcus.
Paul B. Huter
You only ever need a "throttle" when you don't have hardware in the flow-graph pacing things.I am running a USRP source through a throttle to an FFT sink and a file sink. Last time I ran it, I got an "OSParam error", followed by a bunch of "D"s and the FFT was lagging and jumping. Any ideas as to what this is? My sample rate is 50M.
Paul B. Huter
_______________________________________________ Discuss-gnuradio mailing list address@hidden https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
AT 50Msps, whatever your flow-graph is doing will be working *really, really* hard.
-- Marcus Leech Principal Investigator Shirleys Bay Radio Astronomy Consortium http://www.sbrac.org
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
[Prev in Thread] | Current Thread | [Next in Thread] |