[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] 3.6.4.2 test fail
From: |
Tom Rondeau |
Subject: |
Re: [Discuss-gnuradio] 3.6.4.2 test fail |
Date: |
Wed, 4 Sep 2013 09:15:26 -0400 |
On Wed, Sep 4, 2013 at 4:45 AM, Nemanja Savic <address@hidden> wrote:
> After installing 3.6.5.1 there is a problem while when running flowgraph.
> Flowgraph won't start, and the error is following:
>
> Using Volk machine: avx_64_mmx
> -- Loading firmware image: /usr/local/share/uhd/images/usrp1_fw.ihx... done
> -- Opening a USRP1 device...
> -- Loading FPGA image: /usr/local/share/uhd/images/usrp1_fpga.rbf... done
> -- Using FPGA clock rate of 64.000000MHz...
> *** glibc detected *** /usr/bin/python2.6: malloc(): memory corruption:
> 0x0000000005661000 ***
> *** glibc detected *** /usr/bin/python2.6: malloc(): memory corruption:
> 0x0000000005661000 ***
>
> Is this problem due to python 2.6 maybe?
>
> Cheers
Shouldn't be. I believe that I've tested 3.7 using Python 2.5 and 2.6.
How about just starting gnuradio-companion and seeing if you can run a
simple flowgraph without any hardware?
Did ctest (or 'make test') pass?
--
Tom
Visit us at GRCon13 Oct. 1 - 4
http://www.trondeau.com/grcon13
> --
> Nemanja Savić
- Re: [Discuss-gnuradio] 3.6.4.2 test fail, (continued)
- Re: [Discuss-gnuradio] 3.6.4.2 test fail, Nemanja Savic, 2013/09/03
- Re: [Discuss-gnuradio] 3.6.4.2 test fail, Martin Braun (CEL), 2013/09/03
- Re: [Discuss-gnuradio] 3.6.4.2 test fail, Tom Rondeau, 2013/09/03
- Re: [Discuss-gnuradio] 3.6.4.2 test fail, Nemanja Savic, 2013/09/03
- Re: [Discuss-gnuradio] 3.6.4.2 test fail, Tom Rondeau, 2013/09/03
- Re: [Discuss-gnuradio] 3.6.4.2 test fail, Nemanja Savic, 2013/09/03
- Re: [Discuss-gnuradio] 3.6.4.2 test fail, Tom Rondeau, 2013/09/03
- Re: [Discuss-gnuradio] 3.6.4.2 test fail, Nemanja Savic, 2013/09/03
- Re: [Discuss-gnuradio] 3.6.4.2 test fail, Tom Rondeau, 2013/09/03
- Re: [Discuss-gnuradio] 3.6.4.2 test fail, Nemanja Savic, 2013/09/04
- Re: [Discuss-gnuradio] 3.6.4.2 test fail,
Tom Rondeau <=
- Re: [Discuss-gnuradio] How to use USRP to detect and collect weak satellite signals, Mark McCarron, 2013/09/04
- Re: [Discuss-gnuradio] 3.6.4.2 test fail, Nemanja Savic, 2013/09/04