Re: [Discuss-gnuradio] problem running burst detect

[Nemanja Savic]

There is also no --args option. Here are options:

Options:
  -h, --help            show this help message and exit
  -a ADDRESS, --address=ADDRESS
                        select address of the device
                        [default=addr=192.168.10.2]
  -f FREQ, --freq=FREQ  set frequency to FREQ
  -g GAIN, --gain=GAIN  set gain in dB [default=0]
  -R SAMP_RATE, --samp-rate=SAMP_RATE
                        set USRP sample rate [default=200000]
  -t THRESHOLD, --threshold=THRESHOLD
                        Set the detection power threshold (dBm) [default=-60
  -T, --trigger         Use internal trigger instead of detector
                        [default=False]

On Tue, Aug 27, 2013 at 5:52 PM, Marcus D. Leech <address@hidden> wrote:

On 08/27/2013 11:50 AM, Nemanja Savic wrote:

There is no option --type error comes out :(

On Tue, Aug 27, 2013 at 5:14 PM, Marcus D. Leech <address@hidden> wrote:

Hi guys,

I am facing problem when starting uhd_burst_detector.py. It won't start because address is wrong, but since I am using usrp1, I don't know what to put.

Thanks,

--
Nemanja Savić

Well, I'm not familiar with that particular program, but if it has an --args option, then:

--args "type=usrp1"

Should work

--
Nemanja Savić