Re: [Discuss-gnuradio] USRP IP Address

[n]

The last device I received did not appear to have the correct IP set from the 
factory.

I had to reset using the "Device recovery and bricking" procedure here:

http://files.ettus.com/uhd_docs/manual/html/usrp2.html#load-the-images-onto-the-on-board-flash-usrp-n-series-only

and set the IP using the "Change the USRP2's IP address" section from the same 
page.

On Thu, Aug 01, 2013 at 12:35:42AM -0700, Mohammed Ramadan wrote:
> 
> 
>  Dears,
>  i
>  Have USRPn210 with SBX daugtherboard. I installed the gnuradio and Uhd.
>  But have problem that the PC not see the USRP. i edit the ips to make 
> the device 192.168.10.2 and same problem. so, can any one help me to 
> connect the USRP with the PC( the IP , DNS, and the Default gatway).
> 
> Best Regards,
> M.Ramadan

> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio