discuss-gnuradio
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] segfault and gr-fcd


From: Patrik Tast
Subject: Re: [Discuss-gnuradio] segfault and gr-fcd
Date: Sat, 7 Apr 2012 21:32:49 +0300

Oh, tricky....

Patrik

----- Original Message ----- From: "Alexandru Csete" <address@hidden>
To: "Patrik Tast" <address@hidden>
Cc: <address@hidden>
Sent: Saturday, April 07, 2012 20:37
Subject: Re: [Discuss-gnuradio] segfault and gr-fcd


Interesting, because it seems to be the other way around with the
funcube dongle, i.e. 1.0.8 works and 1.0.9-rc crashes.
Note though that when you compile yourself you will use 0.1

Alex

On Sat, Apr 7, 2012 at 6:46 PM, Patrik Tast <address@hidden> wrote:
Hi All,

As mentioned, could this be a libusb problem (conflict)? When running F14 I
could not run any USB gadget many minutes. I got error "Disconnected"
Tried the same gadgets on Fedora 16 and all works infinitely (wont
disconnect).

My libusb versions are shown by executing $ rpm -qa | grep -i libusb

Fedora 14
libusb-devel-0.1.12-23.fc14.i686
libusb1-1.0.8-1.fc14.i686
libusb-0.1.12-23.fc14.i686

Fedora 16
libusb-0.1.3-9.fc16.i686
libusb-devel-0.1.3-9.fc16.i686
libusb1-1.0.9-0.3.rc1.fc16.i686

Patrik

----- Original Message ----- From: "Alexandru Csete" <address@hidden>
To: <address@hidden>
Sent: Saturday, April 07, 2012 18:20
Subject: Re: [Discuss-gnuradio] segfault and gr-fcd


On Sat, Apr 7, 2012 at 4:21 PM, Volker Schroer <address@hidden> wrote:

Hi all,

I'm just using the gr-fcd block with an funcube dongle on a gentoo linux
system.

When I try to change the frequency of the dongle by an slider I get the
following segfault:

...


Hi Volker,

Although using a slider to tune hardware pll is a bad idea, I don't
think the crash you see is because of that. It sounds more like an
issue some people have seen on debian with libusb 1.0.9-pre-something

Which version of libusb do you have? Can you run the included examples
and qthid without crash?

PS: The slider in your example isn't doing much as it has only one step
;-)

Alex

_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio






reply via email to

[Prev in Thread] Current Thread [Next in Thread]