Re: [Discuss-gnuradio] Use USRP1 and USRP N200 at the same time

[Noé Beuret]

Hi!

Thanks a lot for your response.

Last week I tried to install the latest version of GNURadio and UHD with the 
script provided by Marcus Leech, but I read somewhere that GNURadio version 
need to be between 3.3 and 3.5 for working with USRP1 because newer version 
don't use libusrp...  It is right?

And it's not a problem to use both USRPs at the same time without conflict? For 
trying, it is possible to run uhd_fft.py and usrp_fft.py together?

Thanks ;-)

Noé

-----Message d'origine-----
De : address@hidden [mailto:address@hidden De la part de Martin Braun
Envoyé : vendredi 23 mars 2012 14:25
À : address@hidden
Objet : Re: [Discuss-gnuradio] Use USRP1 and USRP N200 at the same time

On Fri, Mar 23, 2012 at 01:51:00PM +0100, Noé Beuret wrote:
> Hi everyone,
> 
> I’m a student in a telecommunication school and I need to use GNURadio 
> for a project.

Cool, good luck!

> I have two USRP : 1 USRP1 (USB interface) and 1 USRP N200 (ethernet 
> interface).
> 
> The USRP1 works with a software that use GNURadio 3.2.2.

...it also works with a current version (unless you've done something super 
funky to it).

> 
> Now, I need to develop an other software with the USRPN200. This 
> software need to run on the same computer, at same time that the first 
> software.
> 
> What GNURadio and UHD version I need? It is possible to keep GNURadio 
> 3.2.2, install UHD and use both USRPs at the same time without conflict?

3.2.2 is ancient. Unless you have a really, really good reason, don't use it. 
Grab the newest version of both UHD and GNU Radio and *then* start your project.

MB

--
Karlsruhe Institute of Technology (KIT)
Communications Engineering Lab (CEL)

Dipl.-Ing. Martin Braun
Research Associate

Kaiserstraße 12
Building 05.01
76131 Karlsruhe

Phone: +49 721 608-43790
Fax: +49 721 608-46071
www.cel.kit.edu

KIT -- University of the State of Baden-Württemberg and National Laboratory of 
the Helmholtz Association