Yooxi,
The USRP1 used an Altera FPGA. The USRP E100 uses a Xilinx Spartan-3A FPGA.
The FPGA code you want to be modifying is in the fpga/usrp2/top/E1x0
directory.
--n
On Wed, Aug 24, 2011 at 9:30 PM, xi yang<address@hidden> wrote:
Hi, all,
We have made a FPGA FFT module.
We downloaded the UHD source code from
https://github.com/EttusResearch/UHD-Mirror/archives/master
We modified the usrp_std.v under
fpga/usrp1/toplevel/usrp_std/
to link our FFT module between rx_buffer and USB.
We have successfully compiled the usrp_std.qpf in Quartus II 9.1.
How can we make it effective in our USRP E100?
We found the way to update FPGA firmware in usrpe1xx-FAQ
http://ettus-apps.sourcerepo.com/redmine/ettus/projects/usrpe1xx/wiki/FAQ?version=30
But what we want to update is the FPGA code.
Thanks a lot!
Yooxi
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio