[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] UHD and gr_block_executor error: "source <gr_bloc
From: |
Josh Blum |
Subject: |
Re: [Discuss-gnuradio] UHD and gr_block_executor error: "source <gr_block gr uhd usrp source (1)> produced no output. We're marking it DONE." |
Date: |
Tue, 02 Aug 2011 12:19:40 -0700 |
User-agent: |
Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.18) Gecko/20110617 Lightning/1.0b2 Thunderbird/3.1.11 |
> UHD source block got error code 0x9
> gr_block_executor: source <gr_block gr uhd usrp source (1)> produced
> no output. We're marking it DONE.
>
> and, much more frequently,
>
> UHD source block got error code 0x10
> gr_block_executor: source <gr_block gr uhd usrp source (1)> produced
> no output. We're marking it DONE.
>
They are totally bogus error codes.
http://www.ettus.com/uhd_docs/doxygen/html/structuhd_1_1rx__metadata__t.html
What do you mean by connecting A or B. Can you send some psudocode that
demonstrates what you are doing that causes the problem?
> I've tried leaving A and B connected the entire time, connecting B
> before disconnecting A, disconnecting A before connecting B, but none of
> these have alleviated the issue. The error messages don't typically
> occur until we've switched to B. Also, I've been unable to find what
> either of these error codes stand for in the GR and UHD documentation.
>