[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] problem in daughter boards
|
From: |
Josh Blum |
|
Subject: |
Re: [Discuss-gnuradio] problem in daughter boards |
|
Date: |
Tue, 19 Jul 2011 11:20:03 -0700 |
|
User-agent: |
Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.18) Gecko/20110617 Lightning/1.0b2 Thunderbird/3.1.11 |
On 07/19/2011 07:37 AM, Eng.Ziedan wrote:
> Dear all
> i have a usrp1, RFX2400 and WBX and i have a coaxial cable from the wifi
> card to the rfx2400 TX/RX port
> i want to pass the stream from the wifi card to the rfx2400 then to the wbx
> to transmit it over the UHF band
> how could i do that ??
> here is the connection i have created (attached)
> please help me as fast as you can
> thanks
>
The WBX and RFX TX/RX antenna port is not full-duplex. Perhaps you want
a diplexer for your wifi card.
>From the docs:
The user may set the receive antenna to be TX/RX or RX2. However, when
using an WBX board in full-duplex mode, the receive antenna will always
be set to RX2, regardless of the settings.
http://www.ettus.com/uhd_docs/manual/html/dboards.html#wbx-series