discuss-gnuradio
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Discuss-gnuradio] USRP1 and WBX, communication distance


From: Gunther Ferdinand
Subject: [Discuss-gnuradio] USRP1 and WBX, communication distance
Date: Tue, 19 Apr 2011 14:44:22 -0700 (PDT)

Hi,
 
   I would like to ask you a question regarding the USRP1 and WBX. Have anybody made some tests with these and other ISM band transceivers to see the communication distance indoor and outdoor? For example if I have a tranceiver on 433MHz and it has a transmission power of 17dBm, which should be the minimum distance in open air to be able to receive data packets sent from the USRP1+WBX+LP0410, (what about indoor - it depends from nr. of walls and thickness but anyway I would like to know your opinion, and your experience with this)? Right now I'm trying to make the packet (<PREAMBLE><SYNC><HEADER><DATA LENGTH><DATA><CRC>) with the help of functions from Gnuradio, and it's quite difficult, and then to make FSK modulation and send it to my transceiver. In documentation for the USRP1 the transmission power is between 50mW - 100 mW (17-20dBm)? For my transceiver that has 17dBm transmission power says that it can transmitt data as far as 800m outdoors, would it apply to USRP1, too? Indoors the transceivers works quite well, I can send data from one module to other in my whole house, the distance is around 15m, through walls (max. 3 walls between transceivers). Anybody tried to do such kind of things, and has arived to any results?
 
I would appriciate any comment on this.
 
Thank you very much,
Gunther.
 

reply via email to

[Prev in Thread] Current Thread [Next in Thread]