[Discuss-gnuradio] Building QT gui without the three D bits

discuss-gnuradio

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Discuss-gnuradio] Building QT gui without the three D bits

From:	Philip Balister
Subject:	[Discuss-gnuradio] Building QT gui without the three D bits
Date:	Tue, 29 Mar 2011 14:37:42 -0400
User-agent:	Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.13) Gecko/20101209 Fedora/3.1.7-0.35.b3pre.fc14 Thunderbird/3.1.7

I'm trying the build qtqui on the USRP-E100. I was making progress untilI run into qwtplot3d and things started to get messy. I should be ableto get qt with 3d support going, but it is not coming up right away andI was hoping I could diable 3d support in gnuradio and just run the 2dqt portions.


Can I build gnuradio with qt support, and omit the 3d pieces?

Philip

[Prev in Thread]

Current Thread

[Next in Thread]

[Discuss-gnuradio] Building QT gui without the three D bits, Philip Balister <=
- Re: [Discuss-gnuradio] Building QT gui without the three D bits, Tom Rondeau, 2011/03/29

Prev by Date: RE: [Discuss-gnuradio] IF Frequency of WBX board
Next by Date: Re: [Discuss-gnuradio] Building QT gui without the three D bits
Previous by thread: [Discuss-gnuradio] how to retrieve the baseband signal strengh
Next by thread: Re: [Discuss-gnuradio] Building QT gui without the three D bits
Index(es):
- Date
- Thread