[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] USRP2 with XCVR- External Clock Setting
From: |
Vlad Stoica |
Subject: |
Re: [Discuss-gnuradio] USRP2 with XCVR- External Clock Setting |
Date: |
Thu, 24 Mar 2011 08:59:47 +0100 |
-------- Original-Nachricht --------
> Datum: Tue, 22 Mar 2011 10:43:49 -0400
> Von: "Marcus D. Leech" <address@hidden>
> An: address@hidden
> Betreff: Re: [Discuss-gnuradio] USRP2 with XCVR- External Clock Setting
> On 22/03/2011 8:42 AM, Vlad Stoica wrote:
> > Hello
> >
> > I want to implement an OFDM Transmission at 2.45GHz, and the internal
> USRP2 oscillator has a deviation at about 22kHz. That is too much and
> interrupts the (software) synchronisation.
> >
> > Because of that i want to use an external clock 10MHz with the USPR2.
> > It shoult be about 5dBm - 15dBm and with an amplitude about Upp = 3V.
> > An square wave should be best, but also a sinus should do it.
> >
> > The question is: Where should i adjust the settings so the USRP2
> > will use the external clock ?
> >
> > I use it with the Matlab Simulink and the standard firmware image.
> >
> > I appreciate your hints
> > Vlad
> >
> Might I suggest that you post your question to either the usrp-users
> mailing list, or one of the MathWorks user support forums instead?
>
>
Ok, thanks ! I didn t know that there is a usrp users mailing list.
Bye
--
NEU: FreePhone - kostenlos mobil telefonieren und surfen!
Jetzt informieren: http://www.gmx.net/de/go/freephone