Re: [Discuss-gnuradio] Subdevice Spec for UHD:USRP source

[Vijay Pillai]

Hi Josh,

If I am using a WBX board, what would be the setting for selection RX2 on slot A?

And what would be the setting for RX/TX on slot A?

Best regards,
-Vijay

--- On Fri, 3/11/11, Josh Blum <address@hidden> wrote:

From: Josh Blum <address@hidden>
Subject: Re: [Discuss-gnuradio] Subdevice Spec for UHD:USRP source
To: address@hidden
Date: Friday, March 11, 2011, 8:05 PM

On 03/11/2011 04:54 PM, Vijay Pillai wrote:
> What is the subdevice spec (Mb0: subdevice_spec) for a USRP:UHD source?
>
> I tried A:1 (to select RX2 on slot A, as provided at http://www.ettus.com/uhd_docs/manual/html/usrp1.html) but it does not work and gave an error.
>

http://www.ettus.com/uhd_docs/manual/html/usrp1.html#specifying-the-subdevice-to-use

This depends on the daugterboard, if you are not using a basic board,
use "A:" to automatically select the first (and only) subdevice on
daughterboard slot A.


-Josh

> Best regards,
> -Vijay
>
>
>
>       
>
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio

_______________________________________________
Discuss-gnuradio mailing list
address@hidden
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio