Re: [Discuss-gnuradio] About clock rate of USRP E100

[Miok Wah]

Hey Matt,

Thanks a lot for your help. Could you explain how to slow down the FPGA/ADC
rate?  How should we modify the firmware? Which part of the code should we
look into?  Thanks!




Matt Ettus wrote:
> 
> 
> As it is currently set up, there are only 2 clock rates.  The OMAP 
> processor can run at up to 720 MHz.  This clock rate is independent of 
> the FPGA, ADC, and DAC clocks.
> 
> The ADC clock can run as high as 64 MS/s.  The DAC always runs at 
> exactly double the rate of the ADC.  The FPGA is normally running at the 
> same speed as the ADC, but you could conceivably run at 2x or 1.5x if 
> you want to go faster, or a number of speeds if you want to go slower.
> 
> We have not tried changing the FPGA/ADC/DAC clock during normal 
> operation, but I don't think it would be worth the trouble to change it 
> dynamically.
> 
> Matt
> 
> 

-- 
View this message in context: 
http://old.nabble.com/About-clock-rate-of-USRP-E100-tp30634189p30650160.html
Sent from the GnuRadio mailing list archive at Nabble.com.