[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] [UHD] CMake Error: The following variables are used i
From: |
Sangho Oh |
Subject: |
[Discuss-gnuradio] [UHD] CMake Error: The following variables are used in this project, but they are set to NOTFOUND. |
Date: |
Wed, 22 Dec 2010 19:10:06 -0500 |
I have compiled and run UHD code that was downloaded one day in last week.
One problem was that "tx_timed_samples.cpp" does not work.
The timing control didn't work.
Even I give 10 secs delay, the code just promptly send samples without any delay.
Whereas receiver properly wait for the specified time before starting the reception process.
Therefore, I have updated UHD code today by
- "git pull" in /root/git/uhd/
- "cmake ../" in /root/git/uhd/build
got following error
-------------------------------------------------------------------------------------
-- Interface address discovery supported through getifaddrs.
--
-- Configuring USRP1 support...
-- USRP1 support configured automatically
-- Enabling USRP1 support.
--
-- Configuring USRP2 support...
-- USRP2 support configured automatically
-- Enabling USRP2 support.
--
-- Configuring USRP-E100 support...
-- USRP-E100 support configured automatically
-- Disabling USRP-E100 support.
--
-- Configuring priority scheduling...
-- Performing Test HAVE_PTHREAD_SETSCHEDPARAM
-- Performing Test HAVE_PTHREAD_SETSCHEDPARAM - Success
-- Performing Test HAVE_WIN_SETTHREADPRIORITY
-- Performing Test HAVE_WIN_SETTHREADPRIORITY - Failed
-- Priority scheduling supported through pthread_setschedparam.
--
-- Configuring module loading...
-- Looking for C++ include dlfcn.h
-- Looking for C++ include dlfcn.h - found
-- Looking for C++ include windows.h
-- Looking for C++ include windows.h - not found
-- Module loading supported through dlopen.
-- Local package data directory: /usr/local/share/uhd
-- Installer package data directory: /usr/share/uhd
--
-- ######################################################
-- # LibUHD enabled components
-- ######################################################
-- * Examples
-- * Utils
-- * Tests
-- * Doxygen
-- * USB
-- * USRP1
-- * USRP2
--
-- ######################################################
-- # LibUHD disabled components
-- ######################################################
-- * Manual
-- * USRP-E100
--
-- Using install prefix: /usr/local
CMake Error: The following variables are used in this project, but they are set to NOTFOUND.
Please set them or make sure they are set and tested correctly in the CMake files:
LIBUSB_INCLUDE_DIR (ADVANCED)
used as include directory in directory /root/git/uhd/host/lib
LIBUSB_LIBRARIES (ADVANCED)
linked by target "uhd" in directory /root/git/uhd/host/lib
--
From: Sangho Oh
Voice mail: (609) 759-1552
- [Discuss-gnuradio] [UHD] CMake Error: The following variables are used in this project, but they are set to NOTFOUND.,
Sangho Oh <=