[Discuss-gnuradio] EEPROM Burning for WBX_NG

[Sanjay Singh]

I have done complete new installation of Ubuntu 9.04 Jaunty and installed Binary packege of GNURADIO(3.2.2).

I have checked under usrpm folder usrp_dbid.py file. Following are the lines in the file

#
# Machine generated by gen_usrp_dbid.py from usrp_dbid.dat
# Do not edit by hand.  All edits will be overwritten.
#

#
# USRP Daughterboard ID's
#

BASIC_TX         = 0x0000
BASIC_RX         = 0x0001

DBS_RX           = 0x0002
TV_RX            = 0x0003
FLEX_400_RX      = 0x0004
FLEX_900_RX      = 0x0005
FLEX_1200_RX     = 0x0006
FLEX_2400_RX     = 0x0007
FLEX_400_TX      = 0x0008
FLEX_900_TX      = 0x0009

FLEX_1200_TX     = 0x000a
FLEX_2400_TX     = 0x000b
TV_RX_REV_2      = 0x000c
DBS_RX_CLKMOD    = 0x000d
LF_TX            = 0x000e
LF_RX            = 0x000f
FLEX_400_RX_MIMO_A = 0x0014
FLEX_900_RX_MIMO_A = 0x0015

FLEX_1200_RX_MIMO_A = 0x0016
FLEX_2400_RX_MIMO_A = 0x0017
FLEX_400_TX_MIMO_A = 0x0018
FLEX_900_TX_MIMO_A = 0x0019
FLEX_1200_TX_MIMO_A = 0x001a
FLEX_2400_TX_MIMO_A = 0x001b
FLEX_400_RX_MIMO_B = 0x0024

FLEX_900_RX_MIMO_B = 0x0025
FLEX_1200_RX_MIMO_B = 0x0026
FLEX_2400_RX_MIMO_B = 0x0027
FLEX_400_TX_MIMO_B = 0x0028
FLEX_900_TX_MIMO_B = 0x0029
FLEX_1200_TX_MIMO_B = 0x002a
FLEX_2400_TX_MIMO_B = 0x002b

FLEX_1800_RX     = 0x0030
FLEX_1800_TX     = 0x0031
FLEX_1800_RX_MIMO_A = 0x0032
FLEX_1800_TX_MIMO_A = 0x0033
FLEX_1800_RX_MIMO_B = 0x0034
FLEX_1800_TX_MIMO_B = 0x0035
TV_RX_REV_3      = 0x0040
DTT754           = 0x0041

DTT768           = 0x0042
WBX_LO_TX        = 0x0050
WBX_LO_RX        = 0x0051
XCVR2450_TX      = 0x0060
XCVR2450_RX      = 0x0061
EXPERIMENTAL_TX  = 0xfffe
EXPERIMENTAL_RX  = 0xffff


Can any one tell me why wbx_ng daughterbord ID is missing.

Thanks in advance

Regards
Sanjay