2. I am using XCVR2450 with USRP2. I initially just wanted to find out which
antenna (J1 or J2 -- connected to RF2 and RF1 in my USRP2 respectively), was
defined to be RX and which one to be TX? I found out from a file
"db_xcvr2450.cc" that J1 was defined to be RX and J1-TX, however with my
spectrum analyzer I found the contrary to be true. Is there an easy way to
check, and be able to set J1 or J2 to Rx or Tx in Python? I did search the
threads and couldn't find satisfying answer.
http://www.ettus.com/uhd_docs/manual/html/dboards.html#xcvr-2450
-Josh
Hi Josh,
Thank you for your answers. For this second answer, I didn't understand your reply. The link you sent does not say anything about how to set the TX/RX to J1/J2. It just says it could be set to either one. My question is, is there a way (API) in python to set this specifically ?
Sorry if I didn't catch something obvious :(.
Thanks,
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio