discuss-gnuradio
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] Using UHD failed to find USRP2


From: Josh Blum
Subject: Re: [Discuss-gnuradio] Using UHD failed to find USRP2
Date: Mon, 15 Nov 2010 09:02:43 -0800
User-agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.2.12) Gecko/20101027 Thunderbird/3.1.6

The gr-uhd blocks are only available in the gnuradio next branch: see http://ettus-apps.sourcerepo.com/redmine/ettus/projects/uhd/wiki#Gnuradio-UHD

-josh

On 11/15/2010 06:30 AM, address@hidden wrote:
Installed UHD following instructions from here:

http://code.ettus.com/redmine/ettus/projects/uhd/wiki

and firmware/images following instructions from here:

http://www.ettus.com/uhd_docs/manual/html/usrp2.html

GNU Radio was checked out from git master, so it is 3.3.1. Installed without
error.


After setting up PC IP, I am able to ping usrp2. Both uhd_find_devices and
uhd_usrp_probe work, results are in the end.

However, when I run sudo benchmark_tx.py, USRP2 (with WBX daughterboard) could
not be found, results are next below.

Any hints will be highly appreciated. I reinstalled both UHD and GNU Radio one
time, same story. I tried to set options of -u, -a, and -e when running
benchmark_tx.py, same story.

-Andrew



sudo benchmark_tx.py -f 434M
************************************************************************************
usrp: failed to find usrp[0]
Traceback (most recent call last):
   File "./benchmark_tx.py", line 133, in<module>
     main()
   File "./benchmark_tx.py", line 97, in main
     tb = my_top_block(mods[options.modulation], options)
   File "./benchmark_tx.py", line 42, in __init__
     self.txpath = usrp_transmit_path.usrp_transmit_path(modulator, options)
   File
"/home/titan/uhd/gnuradio/gnuradio-examples/python/digital/usrp_transmit_path.py",
line 64, in __init__
     self._setup_usrp_sink(options)
   File
"/home/titan/uhd/gnuradio/gnuradio-examples/python/digital/usrp_transmit_path.py",
line 79, in _setup_usrp_sink
     self.u = usrp_options.create_usrp_sink(options)
   File "/usr/local/lib/python2.6/dist-packages/gnuradio/usrp_options.py", line
119, in create_usrp_sink
     gain=options.tx_gain,
   File
"/usr/local/lib/python2.6/dist-packages/gnuradio/blks2impl/generic_usrp.py",
line 195, in __init__
     _generic_usrp_base.__init__(self, **kwargs)
   File
"/usr/local/lib/python2.6/dist-packages/gnuradio/blks2impl/generic_usrp.py",
line 63, in __init__
     except: raise Exception, 'Failed to automatically setup a usrp device.'
Exception: Failed to automatically setup a usrp device.
************************************************************************************



uhd_find_devices works fine, results:
************************************************************************************
linux; GNU C++ version 4.4.5; Boost_104200; UHD_20101109.230702.c0dfc2c

--------------------------------------------------
-- UHD Device 0
--------------------------------------------------
Device Address:
     type: usrp2
     addr: 192.168.10.2
     name:
     serial: 00:50:c2:85:39:b9
************************************************************************************

uhd_usrp_probe works, results:
************************************************************************************
linux; GNU C++ version 4.4.5; Boost_104200; UHD_20101109.230702.c0dfc2c

Target recv sock buff size: 50000000 bytes
Actual recv sock buff size: 131071 bytes

Warning:
     The recv buffer is smaller than the requested size.
     The minimum recommended buffer size is 50000000 bytes.
     See the transport application notes on buffer resizing.
     Please run: sudo sysctl -w net.core.rmem_max=50000000


Warning:
     error in pthread_setschedparam
     Failed to set thread priority 0.5 (realtime):
     Performance may be negatively affected.
     See the general application notes.


Warning:
     error in pthread_setschedparam
     Failed to set thread priority 0.5 (realtime):
     Performance may be negatively affected.
     See the general application notes.

   _____________________________________________________
  /
|       Device: usrp2 device
|     _____________________________________________________
|    /
|   |       Mboard: usrp2 mboard0 - rev 1024
|   |   rev: 1024
|   |   mac-addr: 00:50:c2:85:39:b9
|   |   ip-addr: 255.255.255.255
|   |   serial: 00:50:c2:85:39:b9
|   |     _____________________________________________________
|   |    /
|   |   |       RX DSP: usrp2 ddc0
|   |   |   Codec Rate: 100.000000 Msps
|   |     _____________________________________________________
|   |    /
|   |   |       TX DSP: usrp2 duc0
|   |   |   Codec Rate: 100.000000 Msps
|   |     _____________________________________________________
|   |    /
|   |   |       RX Dboard: usrp2 dboard (rx unit)
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       RX Subdev: WBX (0x0053)
|   |   |   |   Antennas: TX/RX, RX2
|   |   |   |   Freq range: 68.750 to 2200.000 Mhz
|   |   |   |   Gain range PGA0: 0.0 to 31.5 step 0.5 dB
|   |   |   |   Connection Type: C
|   |   |   |   Uses LO offset: No
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       RX Codec: usrp2 adc
|   |   |   |   Gain Elements: None
|   |     _____________________________________________________
|   |    /
|   |   |       TX Dboard: usrp2 dboard (tx unit)
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       TX Subdev: WBX (0x0052)
|   |   |   |   Antennas: TX/RX
|   |   |   |   Freq range: 68.750 to 2200.000 Mhz
|   |   |   |   Gain range PGA0: 0.0 to 25.0 step 0.1 dB
|   |   |   |   Connection Type: C
|   |   |   |   Uses LO offset: No
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       TX Codec: usrp2 dac - ad9777
|   |   |   |   Gain Elements: None

************************************************************************************








_______________________________________________
Discuss-gnuradio mailing list
address@hidden
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio



reply via email to

[Prev in Thread] Current Thread [Next in Thread]