Re: [Discuss-gnuradio] Having firmware trouble in USRP2 - txrx_wbx_udp_20100507

[Vladutzzz]

Thank you Josh.
All the best!



Josh Blum-2 wrote:
> 
> You are running experimental images. You need matching experimental host 
> code: http://gnuradio.org/cgit/jblum.git/log/?h=udp
> 
> -josh
> 
> On 10/25/2010 04:11 AM, Vladutzzz wrote:
>>
>> Hi everyone!
>>
>> I recently updated the USRP2 firmware to txrx_wbx_UDP_20100507.bin from
>> http://code.ettus.com/redmine/ettus/projects/public/wiki/U2binaries .
>> I also downloaded and installed u2_rev3-udp-ise12-20100615.bin  from the
>> same link.
>> These images are specifically designed for WBX with UDP. After putting
>> the
>> SD card into the USRP2, I've tried pinging the USRP2, the process ending
>> unsuccessfully, which I've read somewhere it's expected since it doesn't
>> have a fully implemented IP stack. But it doesn't reply to "find_usrps"
>> nor
>> "benchmark_tx" nor "usrp2_probe".
>> How can I test to see if the firmware and fpga images are actually
>> functioning and the board is operating properly?
>> I am pretty stuck with this and would really appreciate any useful input.
>> Thanks,
>>
>> Vlad.
>>
>>
>>
> 
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> 
> 

-- 
View this message in context: 
http://old.nabble.com/Having-firmware-trouble-in-USRP2---txrx_wbx_udp_20100507-tp30020320p30055576.html
Sent from the GnuRadio mailing list archive at Nabble.com.