[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] Dynamic range questions
From: |
Marcus D. Leech |
Subject: |
[Discuss-gnuradio] Dynamic range questions |
Date: |
Sun, 15 Aug 2010 22:12:25 -0400 |
User-agent: |
Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.11) Gecko/20100720 Fedora/3.0.6-1.fc12 Thunderbird/3.0.6 |
I have an application that must operate in the 25MHz to 40MHz region,
with a channel having a nominal bandwidth
of 50Khz to 700KHz or so. The Rx center frequency may be anywhere in
the 25MHz to 40MHz region.
My question is about dynamic range requirements when operating a
receiver in that neighbourhood of the
spectrum. It's not a neighbourhood I've habitually "hung out" in, so
I don't have any intuitive feel
for how crowded it is, with emphasis on the Rx being in "deep rural"
locations. My suspicion is that
things like GSM receivers have a much worse time of it, and do OK with
14 bits of A/D.
Is it likely that I'll need to do narrower analog filtering in the RF
front end, to avoid dynamic range issues? It's more convenient
if I don't have to do that, but specific Rx locations could have
analog filters installed to more closely match their
specific Rx frequencies.
Cheers
--
Marcus Leech
Principal Investigator
Shirleys Bay Radio Astronomy Consortium
http://www.sbrac.org
- [Discuss-gnuradio] Dynamic range questions,
Marcus D. Leech <=