[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] The USRP2 is not recognized by the computer.
From: |
Matthias Wilhelm |
Subject: |
Re: [Discuss-gnuradio] The USRP2 is not recognized by the computer. |
Date: |
Fri, 6 Aug 2010 14:39:42 +0200 |
Hi,
the USRP2 uses ethernet to communicate with the host, I think you are following
the USRP1 procedure, it connects via USB to the host.
Try the following:
http://gnuradio.org/redmine/wiki/gnuradio/USRP2UserFAQ#Any-hints-for-getting-started-In-particular-what-needs-to-be-done-to-talk-to-the-usrp2-via-the-ethernet
you must take care that you use the correct ethernet device, eth0, eth1, ...;
you can check with ifconfig.
Matthias
Am 06.08.2010 um 13:56 schrieb Mark Hemmerlein:
> Hi all
>
> I am new to gnuradio and Ubuntu. I am trying to install the GNU Radio and am
> following the procedure in gnuradio.org. I am at the point where I am
> checking
> to see if the USRP2 is recognized by the computer. When I enter the command:
>
> ls -lR /dev/bus/usb | grep usrp
> I don't get a response. Please Help.
>
>
> Mark
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio