Re: [Discuss-gnuradio] Update the USRP2

[Tobias Schmid]

Hello again,

that was my mistake. My network  devices have been installed with 
different names by the System. The network card I connected my USRP2 to, 
was names eth1. So I had to change the default settings of the gr_usrp2 
block. So my code workes fine.
But the other question remains:
Would it be better to continue my work using the uhd or not?

Tobias

Am 27.07.2010 08:10, schrieb Tobias Schmid:
> Hello,
>
> I've got another short question.Up til now, I used the 3.2.2 release of 
> Gnuradio, but now I've updates it to the latest git version 3.3.1.
> I wanted to check if my already written code still works, but I didn't even 
> recognize my USRP2. So my question is, do I have to update my USRP2 firmware 
> and the FPGA image as well? Isn't it possible to run my application without 
> updating the USRP?
> If so, do I have the possibility to choose between the new UHD and the common 
> USRP firmware and FPGA image?
>
> I had a look on the binaries offered on:
> http://code.ettus.com/redmine/ettus/projects/public/wiki/U2binaries
>
> Due to this page, I thougt it is possible to choose. On the host side I have 
> already installed the next git branch, as well as the uhd git from ettus. So 
> what would you suggest? Go on working with the common USRP2 staff or change to 
> UHD right now?
> My final ambition is to implement some MIMO staff.
>
> Thanks for your help
>
> Tobias
> ___________________________________________________________
> GRATIS für alle WEB.DE Nutzer: Die maxdome Movie-FLAT!
> Jetzt freischalten unter http://movieflat.web.de
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>