[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Help Req running benchmark
From: |
Johnathan Corgan |
Subject: |
Re: [Discuss-gnuradio] Help Req running benchmark |
Date: |
Thu, 29 Apr 2010 04:26:43 -0700 |
On Thu, Apr 29, 2010 at 02:40, jack william <address@hidden> wrote:
> After successfully installing gnuradio, i ran example benchmark_ofdm.py .
> I didnt even plug the usrp's and i got:
The benchmark_ofdm.py script is a loopback test where the transmitter
is connected to a simulated channel, then to the receiver. Thus it
runs without USRPs, and is meant to see how the OFDM code operates
under various conditions of simulated frequency/timing offset and
AWGN.
> when i ran benchmark_ofdm_tx.py it said cant find usrp.
This is the actual transmitter script. It needs a USRP to run.
You'll need to run the receiver script benchmark_ofdm_rx.py with a 2nd
USRP, either on the same or a different machine, with appropriate
antennas, etc.
Johnathan