[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] Stripchart mode for gr_oscope
From: |
Marcus D. Leech |
Subject: |
[Discuss-gnuradio] Stripchart mode for gr_oscope |
Date: |
Tue, 27 Apr 2010 23:03:15 -0400 |
User-agent: |
Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.9) Gecko/20100330 Fedora/3.0.4-1.fc12 Thunderbird/3.0.4 |
Earlier, I had asked if there was any combination of parameters to
gr_oscope that would cause it to
act like a strip-chart, with new samples entering (at a low rate) on
one end, and the chart updated on
every sample, with samples slowly working their way to the other end,
and thence to oblivion.
Couldn't find any way to make gr_oscope do that, so I added a new
Trigger mode,
gr_TRIG_MODE_STRIPCHART that causes the process_sample method to
treat incoming samples
quite differently, and "stripchart" them.
I have this working in my local working copy of the latest GIT.
You really don't want to use this mode for high-speed data, but it's
really useful for things like
RMS power over very long time periods.
I shall make arrangements to fold it in, when appropriate.
--
Marcus Leech
Principal Investigator
Shirleys Bay Radio Astronomy Consortium
http://www.sbrac.org
- [Discuss-gnuradio] Stripchart mode for gr_oscope,
Marcus D. Leech <=