[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] UHF monitoring
From: |
adib_sairi |
Subject: |
Re: [Discuss-gnuradio] UHF monitoring |
Date: |
Mon, 12 Apr 2010 18:12:29 -0700 (PDT) |
you don't have to write a complex script. use the usrp_fft as your starting
point. understand it and edit where needed. you don't even have to write a
new processing block =) good luck.
schuler101 wrote:
>
> Thanks for reply. I had one more question, if I was just monitoring the
> usage of channel (it is being used or not at any moment), do I still need
> to write complex gnuradio scripts? My guess would be that it should be
> easy to write corresponding scripts since I am not trying to decipher
> received signal as such. Are such scripts already available in
> open-source? Thanks a lot and my apologies for not being very
> radio-literate :(
>
> George
>
>
>
> Johnathan Corgan-2 wrote:
>>
>> On Sun, Apr 11, 2010 at 08:01, schuler101 <address@hidden> wrote:
>>
>>> I want to monitor channels with bandwidth 6Mhz. In particular, I want to
>>> see
>>> time-variant usage of channels in 400-800Mhz range. I do not really want
>>> to
>>> decipher down the signals. Can you please check if my method is correct
>>> or
>>> not.
>>
>> Yes. The USRP1 or USRP2 and TVRX daughterboard will allow you to do
>> exactly this. You will need to write a GNU Radio application to
>> analyze the incoming samples and display the information you are
>> interested in, unless the existing spectrum or oscilloscope utilities
>> will give you what you want.
>>
>> Johnathan
>>
>>
>> _______________________________________________
>> Discuss-gnuradio mailing list
>> address@hidden
>> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>>
>>
>
>
--
View this message in context:
http://old.nabble.com/UHF-monitoring-tp28209296p28219210.html
Sent from the GnuRadio mailing list archive at Nabble.com.