|
From: | Josh Blum |
Subject: | Re: [Discuss-gnuradio] Error when trying to run two python programs simultaneously |
Date: | Tue, 23 Mar 2010 10:58:48 -0700 |
User-agent: | Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.9pre) Gecko/20100217 Shredder/3.0.3pre |
-Josh On 03/23/2010 09:52 AM, drcabrejos wrote:
Josh, Thanks for the prompt reply. I tried using this command, but this command seems to be applied if I have 2 USRPs connected to a single computer. On my case, I have 2 computers and 1 USRP connected to each computer. Each USRP have 2 RFX2400 daughterboards. I'm trying to run both programs "tunnel.py" and "usrp_spectrum_sense.py" at the same time, each one using a different daughterboard. tunnel.py would use side A while usrp_spectrum_sense.py would use side B. Then I got the error saying that the USB port was already in use and would not be able to run the second program. Would it be possible to run both programs simultaneously in 1 USRP. This is because on both sides I'd be doing the same thing. Spectrum sensing and continuous communication. Thanks! David Cabrejos Josh Blum-2 wrote:On 03/23/2010 07:46 AM, drcabrejos wrote:Hi All, I have 2 (two) USRP1 and 2 (two) RFX2400 connected to each USRP1. What I want to do is to have communication between the devices and scan for the spectrum simultaneously. If running programs one by one, all works great. Running both at the same time, gives me an error saying that the USB port is already being used. Running: uses RFX2400 on port A /usr/share/gnuradio/examples/digital/tunnel.py --freq 2.422G Trying to start: uses RFX2400 on port B /usr/share/gnuradio/examples/usrp/usrp_spectrum_sense.py -R B 2.4095G 2.4625GWhen you have multiple usrps, you need to differentiate them by using the "which" parameter: tunnel.py has this option on the command line: -w WHICH, --which=WHICH select USRP board [default=0] try ./tunnel.py<your args here> -w1 spectrum_sense.py does not have this option, so it will have to be the 0 by default or you will have to modify the script to pass which=<x> into the usrp contructor. -josh _______________________________________________ Discuss-gnuradio mailing list address@hidden http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
[Prev in Thread] | Current Thread | [Next in Thread] |