[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] reconfiguring with usrp2 src present
From: |
Veljko Pejovic |
Subject: |
Re: [Discuss-gnuradio] reconfiguring with usrp2 src present |
Date: |
Tue, 16 Feb 2010 14:32:52 -0800 |
Thanks a lot for the answer, Jonathan.
Yes, I am using 3.2.2, I'll try with the latest trunk, although I
remember that in past I had problems with building gr-pager on Ubuntu
9.10.
cheers,
Veljko
p.s. I'm using 11370 firmware. Do I have to change the firmware too?
2010/2/16 Johnathan Corgan <address@hidden>:
> On Tue, 2010-02-16 at 13:47 -0800, Veljko Pejovic wrote:
>> Is it possible to dynamically reconfigure a flow graph that has a usrp2
>> source?
>
> Yes.
>
>> I tested a simple lock()/unlock() from the top graph, and also from
>> the other parts of the graph. I always get the following error:
>>
>> usrp2: channel 0 not receiving
>> usrp2::rx_samples() failed
>
> Are you using 3.2.2? If so, I think this is a bug that was fixed in our
> development since then.
>
> Johnathan
>
>