Re: [Discuss-gnuradio] Testing USRP with WBX

[Timothy Newman]

I believe you need to use the current source from the git tree, not the 
3.2.2 tarball.

Tim

Matthew Robert wrote:
> Hi List,
>
> I have a USRP1 with a WBX in the B side and a DBSRX in the A side. I
> have just done a fresh install of the stable tarball (3.2.2) and I ran
> the usrper load_standard_bits. The USRP1 serial number is in the
> 3700-3800 range so I believe it is compatible with the WBX.
>
> When I run usrp_benchmark I get the following error:-
>
>
>
> Testing 32MB/sec...
> Warning: Treating daughterboard with invalid EEPROM contents as if it
> were a "Basic Tx."
> Warning: This is almost certainly wrong...  Use appropriate
> burn-*-eeprom utility.
>
>
> Warning: Treating daughterboard with invalid EEPROM contents as if it
> were a "Basic Rx."
> Warning: This is almost certainly wrong...  Use appropriate
> burn-*-eeprom utility.
>
> uUusb_throughput = 32M
> ntotal    = 16000000
> nright    = 15988058
> runlength = 15988058
> delta     = 11942
> OK
> Max USB/USRP throughput = 32MB/sec
>
>
> Is there something more I need to do to make this work?
>
> Cheers,
> Matt
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>